인재도 많고 경쟁도 치열한 이 사회에서 IT업계 인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지켜야만 합니다.우리 ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다. HP 인증HP0-J12인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의HP 인증HP0-J12로 시험을 한방에 정복하세요.
ITExamDump는 여러분의 요구를 만족시켜드리는 사이트입니다. 많은 분들이 우리사이트의 it인증덤프를 사용함으로 관련it시험을 안전하게 패스를 하였습니다. 이니 우리 ITExamDump사이트의 단골이 되었죠. ITExamDump에서는 최신의HP HP0-J12자료를 제공하며 여러분의HP HP0-J12인증시험에 많은 도움이 될 것입니다.
ITExamDump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.HP HP0-J12시험자료는 우리 ITExamDump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는HP HP0-J12시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
HP HP0-J12인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이HP HP0-J12인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 여러분은 응시 전 저희의 문제와 답만 잘 장악한다면 빠른 시일 내에 많은 성과 가 있을 것입니다.
시험 번호/코드: HP0-J12
시험 이름: HP (Supporting ESL E-Series and EML E-Series Libraries)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 119 문항
업데이트: 2013-09-23
HP0-J12 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-J12.html
NO.1 What are the main considerations when choosing a location for an EML E-Series tape library? (Select
three.)
A.floor space
B.room height
C.power requirements
D.lighting requirements
E.grounding requirements
F.distance to disk storage
Answer: ACE
HP pdf HP0-J12 HP0-J12 HP0-J12 pdf
NO.2 What are possible causes of inventory failure in ESL E-Series tape libraries? (Select two.)
A.The library has a drive failure.
B.One of the clusters is disconnected.
C.The library front is facing bright sunlight.
D.Unapproved bar code labels are being used.
E.The Interface Controller is disconnected from the Fibre Channel switch.
Answer: CD
HP시험문제 HP0-J12기출문제 HP0-J12
NO.3 What can be connected using the vacant Ethernet port on the right side of the cabinet controller in an
ESL E-Series tape library?
A.an external LAN
B.cluster controllers
C.interface management card
D.Fibre Channel interface controllers
Answer: A
HP HP0-J12자격증 HP0-J12
NO.4 Click the Exhibit button.
What is the maximum supported number of drives that can be installed in a CLM configuration?
A.40
B.44
C.60
D.64
Answer: B
HP인증 HP0-J12자격증 HP0-J12 HP0-J12
NO.5 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface
to?
A.tape devices
B.library robotics
C.management interface card
D.e2400-160 Interface Controller
Answer: B
HP기출문제 HP0-J12최신덤프 HP0-J12자료
NO.6 For which connection, other than the cabinet controller, is the I2C network cable used in ESL E-Series
tape libraries?
A.external LANs
B.cluster controllers
C.interface management cards
D.Fibre Channel interface controllers
Answer: B
HP HP0-J12 HP0-J12 HP0-J12 HP0-J12최신덤프
NO.7 How often is the CommandView TL Health Summary screen updated?
A.every 30 seconds
B.at 15-minute intervals
C.whenever the library status changes
D.configurable to any value up to 900 seconds
Answer: C
HP HP0-J12 HP0-J12 HP0-J12인증
NO.8 With which management specification does the Command View TL Provider comply?
A.Direct Management Initiative (DMI)
B.Advanced Remote Management (ARM)
C.Simple Network Management Protocol (SNMP)
D.Storage Management Initiative Specification (SMI-S)
Answer: D
HP HP0-J12덤프 HP0-J12시험문제 HP0-J12기출문제 HP0-J12시험문제
NO.9 What is important to remember when changing from Manual to Automatic mode of the Interface
Manager of an ESL E-Series tape library?
A.All drives must be taken offline.
B.Fibre Channel cables must be unplugged.
C.Interface Controllers must be powered off first.
D.Any customizations created in Manual mode will be lost.
Answer: D
HP pdf HP0-J12 dump HP0-J12
NO.10 When is Lock Element Addressing used in the ESL E-Series library?
A.with multiple tape drive clusters
B.as an electronic lock of the access doors
C.when multiple Interface Controllers are used
D.for cross-linked libraries with three or more cabinets
Answer: D
HP HP0-J12 HP0-J12기출문제
NO.11 Which HP document provides the most current, supported configurations for Enterprise class libraries
in a SAN environment?
A.Service Guide
B.SAN Design Guide
C.EBS Compatibility Matrix
D.training course documentation
Answer: C
HP기출문제 HP0-J12 dumps HP0-J12 HP0-J12
NO.12 What can you do to speed up the power-on process while troubleshooting an EML 71e library?
A.Remove all media from the library.
B.Power-on the library with the load port door open.
C.Disable the auto audit, remembering to re-enable it and reboot the library before leaving the customer
site.
D.Configure inventory mode to bar code labels not required, remembering to reset bar code labels
required before leaving the customer site.
Answer: C
HP HP0-J12 dump HP0-J12시험문제 HP0-J12최신덤프 HP0-J12
NO.13 How many cartridge slots can be used in an 8U drive expansion module mounted at the bottom of an
EML E-Series library?
A.48
B.87
C.94
D.103
Answer: B
HP HP0-J12시험문제 HP0-J12 HP0-J12기출문제 HP0-J12인증 HP0-J12덤프
NO.14 Which scheme is used in the Command Line Interface for drive and slot numbers in ESL E-Series
tape libraries?
A.0 based
B.1 based
C.2 based
D.Hex based
Answer: B
HP HP0-J12 HP0-J12인증 HP0-J12 dump
NO.15 What is the hard wired IP address of the Interface Manager card in an EML E-Series tape library on the
private network?
A.1.1.1.1
B.10.0.0.1
C.192.168.2.1
D.155.155.155.1
Answer: C
HP HP0-J12 HP0-J12
NO.16 Click the Exhibit button.
Which component is connected to port E1 of the cluster controller if it is in drive cluster 0 of an ESL
E-Series tape library?
A.cabinet controller
B.Interface Controller
C.lower cluster controller
D.Interface Manager card
Tape Library
Answer: A
HP HP0-J12최신덤프 HP0-J12 HP0-J12 dumps HP0-J12 HP0-J12시험문제
NO.17 Click the Exhibit button.
Which ESL E-Series tape library component (used to carry data cartridges to a secondary cabinet) is
shown in the figure?
A.CLM arm
B.CLM controller
C.picker assembly
D.cartridge transfer robot
Answer: A
HP pdf HP0-J12 HP0-J12시험문제 HP0-J12 dump
NO.18 What is the maximum cartridge slot count in an EML E-Series library?
A.325
B.470
C.505
D.595
Answer: C
HP자격증 HP0-J12 HP0-J12 dump
NO.19 Which parts of the Extended Tape Library Architecture are SNIA compliant and support the Storage
Management Initiative Specifications (SMI-S)? (Select two.)
A.Secure Manager
B.Interface Manager
C.Interface Controller
D.Robotics Controller
E.Command View Tape Library
Answer: BE
HP HP0-J12 HP0-J12자료 HP0-J12 HP0-J12자격증 HP0-J12자료
NO.20 What is the purpose of the Stop button on the Operator Control Panel of ESL E-Series tape libraries?
A.to halt the robotics
B.to restart the library
C.to shut down the library
D.to pause a running backup process
Answer: A
HP HP0-J12 HP0-J12 HP0-J12
NO.21 Click the Exhibit button.
Which ESL E-Series tape library component does the exhibit display?
A.cluster controller
B.cabinet controller
C.Interface Manager
D.Interface Controller
Answer: C
HP기출문제 HP0-J12 dump HP0-J12 pdf HP0-J12자격증
NO.22 Which statement about an EML E-Series library is correct?
A.It allows serverless backup with only a few configuration steps if a Secure Manager license is installed.
B.The initial configuration can be done over the front panel, Command View TL or the serial port on the
robotics controller using CLI.
C.It is fully compliant with the Storage Management Initiative Specifications (SMI-S) and can be
configured with HP Storage Essentials.
D.It bridges the capabilities and features between the business-class HP StorageWorks MSL Series and
enterprise-class ESL E-Series tape libraries.
Answer: D
HP dump HP0-J12시험문제 HP0-J12 dumps
NO.23 Which tape device attribute does the ESL E-Series tape library Interface Manager use to determine
the physical location of each tape drive in the library?
A.bus number
B.SCSI address
C.serial number
D.drive slot position
Answer: C
HP HP0-J12자료 HP0-J12 dump HP0-J12 dumps HP0-J12
NO.24 Click the Exhibit button.
In the exhibit, which item number represents the host Fibre Channel connections?
A.4
B.6
C.9
D.10
Answer: C
HP최신덤프 HP0-J12 HP0-J12자료 HP0-J12덤프
NO.25 What must be configured in CommandView TL when manually adding an ESL E-Series library?
A.library IP address
B.library serial number
C.tape drive and robot SCSI IDs
D.Interface Manager user name and password
Answer: A
HP자격증 HP0-J12 HP0-J12
NO.26 What is reported by the LP/PNL sensor of an ESL E-Series tape library?
A.library door status
B.x-axis motor position
C.y-axis motor position
D.magazines and load ports status
Answer: D
HP시험문제 HP0-J12 HP0-J12최신덤프
NO.27 What are advantages of using Secure Manager EML? (Select two.)
A.It allows library partitioning.
B.Management of direct backup is allowed.
C.It provides faster access to tape devices.
D.Device level mapping is easily configured.
E.User access management is easily configured.
Answer: AD
HP자격증 HP0-J12 dumps HP0-J12최신덤프 HP0-J12
NO.28 Click the Exhibit button.
What does Number 2 on the exhibit represent?
A.x axis motor
B.y axis motor
C.optical scanner
D.home position sensor
Answer: B
HP인증 HP0-J12 HP0-J12 HP0-J12 dump
NO.29 What are the standard cabling requirements for the Interface Manager card of an EML E-Series tape
library?
A.4 x Ethernet to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
B.4 x Ethernet to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
C.4 x Fibre Channel to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
D.4 x Fibre Channel to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
Answer: A
HP HP0-J12자료 HP0-J12 HP0-J12시험문제
NO.30 Click the Exhibit button.
Which ESL E-Series tape library configuration is shown in the Operator Control Panel Library screen?
A.last cabinet
B.primary cabinet
C.secondary cabinet
D.stand-alone cabinet
Answer: B
HP HP0-J12 HP0-J12시험문제 HP0-J12 dumps HP0-J12시험문제
ITexamdump의 C_THR12_66덤프의 VCE테스트프로그램과 LOT-404덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 ICBB시험에 대비한 고품질 덤프와 C_HANATEC_1시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-B102시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기