RH033 덤프 RedHat 인증

RedHat인증 RH033시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 RedHat인증 RH033덤프는RedHat인증 RH033시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.

RedHat인증 RH033시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 RedHat인증 RH033시험문제에 대비하여 제작한RedHat인증 RH033덤프가 있다는 것을 모르고 있기때문입니다. RedHat인증 RH033시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 RedHat인증 RH033덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.

우리ITExamDump 사이트에서RedHat RH033관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.

시험 번호/코드: RH033
시험 이름: RedHat (Red Hat Linux Essentials)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 153 문항
업데이트: 2014-04-28

IT자격증을 많이 취득하여 IT업계에서 자신만의 단단한 자리를 보장하는것이 여러분들의 로망이 아닐가 싶습니다. ITExamDump의 완벽한 RedHat인증 RH033덤프는 IT전문가들이 자신만의 노하우와 경험으로 실제RedHat인증 RH033시험문제에 대비하여 연구제작한 완벽한 작품으로서 100%시험통과율을 보장합니다.

ITExamDump에서는 가장 최신이자 최고인RedHat인증 RH033시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. RedHat인증 RH033덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. RedHat인증 RH033시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.

ITExamDump는 IT인증관련덤프를 제공하는 최고의 업체입니다, 덤프들은 ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 최고의 제품입니다. 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다.

우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.RedHat RH033인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%RedHat RH033인증시험을 패스할 수 있다는 것을 보장합니다.

RH033 덤프무료샘플다운로드하기: http://www.itexamdump.com/RH033.html

NO.1 Which of the following commands will you use to list all local and remote printers attached to your
computer?
A. lpq
B. lpstat -d
C. lpstat -t
D. lpr
Answer: C

RedHat   RH033최신덤프   RH033   RH033   RH033기출문제   RH033 pdf

NO.2 Fill in the blank with the appropriate tool. __________ is a public domain collection of tools to allow
Unix systems to manipulate MS-DOS files: read, write, and move around files on an MSDOS file system.
A. mtools
Answer: A

RedHat자격증   RH033최신덤프   RH033

NO.3 You want to temporarily change your primary group to another group of which you are a member. In this
process, a new shell will be created, and when you exit the shell, your previous group will be reinstated.
Which of the following commands will you use to accomplish this task?
A. chmod
B. newgrp
C. chgrp
D. chown
Answer: B

RedHat   RH033   RH033

NO.4 Fill in the blank with the required permission to complete the statement below. In order to make a script
executable in a Linux computer, you must assign the___________ permission to the script file.
A. execute
Answer: A

RedHat dump   RH033   RH033인증   RH033자료

NO.5 Mark is a newly appointed Network Technician for McNeil Inc. The company has a Linux-based
network. He is working on the Red Hat operating system. He wants to sort a file named marketing.txt in
the reverse alphabetical order. Which of the following commands should Mark use to accomplish this
task?
A. sort -u marketing.txt
B. sort marketing.txt
C. sort -n marketing.txt
D. sort -r marketing.txt
Answer: D

RedHat인증   RH033   RH033자격증

NO.6 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network. David, a
Sales Manager, wants to know the name of the shell that he is currently using. Which of the following
commands will he use to accomplish the task?
A. ECHO $shell
B. RM $shell
C. MV $shell
D. LS $shell
Answer: A

RedHat   RH033덤프   RH033덤프   RH033인증

NO.7 Which of the following commands is used to access Windows resources from Linux workstation?
A. rsync
B. mutt
C. scp
D. smbclient
Answer: D

RedHat   RH033덤프   RH033 dumps   RH033자격증   RH033

NO.8 Which of the following text editing tools can be used to edit text files without having to open them?
A. less
B. sed
C. vi
D. more
Answer: B

RedHat덤프   RH033   RH033   RH033 dumps   RH033

NO.9 Which of the following commands will you run to do case-sensitive search for files named foobar.png?
A. locate -name foobar.png
B. find -iname foobar.png
C. grep-name foobar.png
D. find -name foobar.png
Answer: D

RedHat   RH033덤프   RH033   RH033 pdf   RH033

NO.10 You are a newly appointed Red Hat Technician for company Inc. The company has a Linux-based
network. You want to install a package named httpd on your Linux system. Before installing the package,
you want to get the list of those packages that httpd depends on. Which of the following commands will
you use to accomplish the task?
A. rpm deplist httpd
B. yum deplist httpd
C. yum list httpd
D. rpm -qR httpd
Answer: B

RedHat최신덤프   RH033인증   RH033인증   RH033최신덤프   RH033 dump

NO.11 You work as the Network Administrator for Perfect solutions Inc. The company has a Linux-based
Network. You are working as a root user. You want to know what the day will be on 20 July 2010. Which of
the following commands should you use to accomplish this task?
A. cal
B. cal 20 July
C. cal 7 2010
D. date
Answer: C

RedHat자격증   RH033   RH033

NO.12 You work as the Network Administrator for McNeil Inc. The company has a Linux-based network.You
are working as a root user on Red Hat operating system. You are currently running a programnamed
My_program. You are getting some error messages while executing the program. Youwant to redirect
these error messages to a file named file2 rather than being displayed on the
screen.Which of the following tools should you use to accomplish the task?
A. My_program >> file2
B. My_program 2> file2
C. My_program 2>> file2
D. My_program > file2
Answer: B

RedHat   RH033시험문제   RH033

NO.13 Which of the following key-combinations is used to redo a change undone by a u command in vim?
A. Ctrl-w, Arrow
B. Ctrl-w, s
C. Ctrl-r
D. Ctrl-w, v
Answer: C

RedHat최신덤프   RH033   RH033   RH033

NO.14 John works as a Network Administrator for Perfect Solutions Inc. The company has a Linux-based
network. John is working as a root user on the Linux operating system. He wants to break a dat a.txt file,
200MB in size, into two files in which the size of the first file named data.txt.aa should be150MB and that
of the second file named data.txt.ab should be 50MB. To accomplish his task and to further delete the
data.txt file, he enters the following command: split --verbose -b 150m data.txt data.txt. ; rm -vf data.txt
Which of the following commands can John use to join the splitted files into a new data.txt file?
A. vi data.txt.*
B. less data.txt.* > data.txt
C. cat data.txt.* > data.txt
D. vi data.txt.* > data.txt
Answer: C

RedHat   RH033인증   RH033   RH033

NO.15 Which ftp client command allows you to upload multiple files simultaneously using the "*" wildcard?
A. mput
B. mget
C. put
D. get
Answer: A

RedHat   RH033   RH033시험문제   RH033 dumps

NO.16 Which of the following commands copies files between hosts on a network and uses the same
authentication as ssh, and will ask for passwords or passphrases if they are needed for authentication?
A. scp
B. rcp
C. cp
D. mv
Answer: A

RedHat   RH033최신덤프   RH033시험문제   RH033

NO.17 Which of the following options is used with aspell to specify the location of the main word list?
A. d,--master=string
B. -p,--personal=file
C. --jargon=string
D. --dict-dir=dir
Answer: D

RedHat dumps   RH033   RH033   RH033자격증

NO.18 You work as the Network technician for McNeil Inc. The company has a Linux-based Network. You are
working on the Red Hat operating system. You want to remove some write protected files and directories.
Which of the following commands should you use to accomplish this task?
A. rm -rf
B. rm -f
C. rmdir
D. rm
Answer: A

RedHat자료   RH033자격증   RH033   RH033최신덤프

NO.19 Which of the following commands is used to securely copy files from one host to another over the
network?
A. ls
B. cat
C. mutt
D. scp
Answer: D

RedHat최신덤프   RH033시험문제   RH033   RH033 pdf

NO.20 You work as a Network Administrator for McNeil Inc. The company has a Linux-based network. A printer
is configured on the network. You want to remove a file from a print queue. Which of the following
commands will you use to accomplish this?
A. LPR
B. LPQDEL
C. LPRM
D. LPQ
Answer: C

RedHat자료   RH033   RH033 pdf   RH033최신덤프

ITexamdump의 MB6-872덤프의 VCE테스트프로그램과 642-457덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C-TSCM62-64시험에 대비한 고품질 덤프와 PMI-100시험 최신버전덤프를 제공해드립니다. 최고품질 700-303시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/RH033.html

Oracle 1Z0-051 덤프자료

ITExamDump의 Oracle 1Z0-051덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 Oracle 1Z0-051덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.

ITExamDump의Oracle 1Z0-051시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Oracle 1Z0-051인증시험덤프로 시험패스를 보장합니다.

1Z0-051인증시험은Oracle사의 인중시험입니다.Oracle인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Oracle인증1Z0-051시험을 응시합니다.하지만 실질적으로1Z0-051시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.

시험 번호/코드: 1Z0-051
시험 이름: Oracle (Oracle Database: SQL Fundamentals I)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 292 문항
업데이트: 2014-04-28

ITExamDump에서 제공되는Oracle 1Z0-051인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 아니 거이 같습니다. 우리ITExamDump의 덤프를 사용한다면 우리는 일년무료 업뎃서비스를 제공하고 또 100%통과 율을 장담합니다. 만약 여러분이 시험에서 떨어졌다면 우리는 덤프비용전액을 환불해드립니다.

지금 같은 상황에서 몇년간Oracle 1Z0-051시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게Oracle 1Z0-051시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의1Z0-051시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은1Z0-051시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

Oracle인증 1Z0-051시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 Oracle인증 1Z0-051덤프는Oracle인증 1Z0-051시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.

ITExamDump는 전문적인 IT인증시험덤프를 제공하는 사이트입니다.1Z0-051인증시험을 패스하려면 아주 현병한 선택입니다. ITExamDump에서는1Z0-051관련 자료도 제공함으로 여러분처럼 IT 인증시험에 관심이 많은 분들한테 아주 유용한 자료이자 학습가이드입니다. ITExamDump는 또 여러분이 원하도 필요로 하는 최신 최고버전의1Z0-051문제와 답을 제공합니다.

1Z0-051 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-051.html

NO.1 View the Exhibit to examine the description for the SALES table.
Which views can have all DML operations performed on it? (Choose all that apply.)
A. CREATE VIEW v3
AS SELECT * FROM SALES
WHERE cust_id = 2034
WITH CHECK OPTION;
B. CREATE VIEW v1
AS SELECT * FROM SALES
WHERE time_id <= SYSDATE - 2*365
WITH CHECK OPTION;
C. CREATE VIEW v2
AS SELECT prod_id, cust_id, time_id FROM SALES
WHERE time_id <= SYSDATE - 2*365
WITH CHECK OPTION;
D. CREATE VIEW v4
AS SELECT prod_id, cust_id, SUM(quantity_sold) FROM SALES
WHERE time_id <= SYSDATE - 2*365
GROUP BY prod_id, cust_id
WITH CHECK OPTION;
Answer: AB

Oracle   1Z0-051   1Z0-051 pdf   1Z0-051 dumps   1Z0-051

NO.2 View the Exhibit and examine the structure of the CUSTOMERS table.
Which two tasks would require subqueries or joins to be executed in a single statement? (Choose two.)
A. listing of customers who do not have a credit limit and were born before 1980
B. finding the number of customers, in each city, whose marital status is 'married'
C. finding the average credit limit of male customers residing in 'Tokyo' or 'Sydney'
D. listing of those customers whose credit limit is the same as the credit limit of customers residing in the
city 'Tokyo'
E. finding the number of customers, in each city, whose credit limit is more than the average credit limit of
all the customers
Answer: DE

Oracle   1Z0-051   1Z0-051   1Z0-051   1Z0-051

NO.3 Which two statements are true regarding single row functions? (Choose two.)
A. They a ccept only a single argument.
B. They c an be nested only to two levels.
C. Arguments can only be column values or constants.
D. They a lways return a single result row for every row of a queried table.
E. They c an return a data type value different from the one that is referenced.
Answer: DE

Oracle   1Z0-051덤프   1Z0-051   1Z0-051

NO.4 View the Exhibit; e xamine the structure of the PROMOTIONS table.
Each promotion has a duration of at least seven days .
Your manager has asked you to generate a report, which provides the weekly cost for each promotion
done to l date.
Which query would achieve the required result?
A. SELECT promo_name, promo_cost/promo_end_date-promo_begin_date/7
FROM promotions;
B. SELECT promo_name,(promo_cost/promo_end_date-promo_begin_date)/7
FROM promotions;
C. SELECT promo_name, promo_cost/(promo_end_date-promo_begin_date/7)
FROM promotions;
D. SELECT promo_name, promo_cost/((promo_end_date-promo_begin_date)/7)
FROM promotions;
Answer: D

Oracle dump   1Z0-051   1Z0-051   1Z0-051 dump   1Z0-051자격증

NO.5 View the Exhibit and examine the structure of the PRODUCTS table.
You need to generate a report in the following format:
CATEGORIES
5MP Digital Photo Camera's category is Photo
Y Box's category is Electronics
Envoy Ambassador's category is Hardware
Which two queries would give the required output? (Choose two.)
A. SELECT prod_name q'''s category is ' prod_category CATEGORIES
FROM products;
B. SELECT prod_name q'['s ]'category is ' prod_category CATEGORIES
FROM products;
C. SELECT prod_name q'\'s\' ' category is ' prod_category CATEGORIES
FROM products;
D. SELECT prod_name q'<'s >' 'category is ' prod_category CATEGORIES
FROM products;
Answer: CD

Oracle   1Z0-051 dumps   1Z0-051최신덤프   1Z0-051시험문제

NO.6 You need to extract details of those products in the SALES table where the PROD_ID column
contains the string '_D123'.
Which WHERE clause could be used in the SELECT statement to get the required output?
A. WHERE prod_id LIKE '%_D123%' ESCAPE '_'
B. WHERE prod_id LIKE '%\_D123%' ESCAPE '\'
C. WHERE prod_id LIKE '%_D123%' ESCAPE '%_'
D. WHERE prod_id LIKE '%\_D123%' ESCAPE '\_'
Answer: B

Oracle기출문제   1Z0-051기출문제   1Z0-051   1Z0-051   1Z0-051

NO.7 View the E xhibit and examine the data in the EMPLOYEES table.
You want to generate a report showing the total compensation paid to each employee to date.
You issue the following query:
SQL>SELECT ename ' joined on ' hiredate
', the total compensation paid is '
TO_CHAR(ROUND(ROUND(SYSDATE-hiredate)/365) * sal + comm)
"COMPENSATION UNTIL DATE"
FROM employees;
What is the outcome?
A. It generates an error because the alias is not valid.
B. It executes successfully and gives the correct output.
C. It executes successfully but does not give the correct output.
D. It generates an error because the usage of the ROUND function in the expression is not valid.
E. It generates an error because the concatenation operator can be used to combine only two items.
Answer: C

Oracle   1Z0-051   1Z0-051 pdf   1Z0-051덤프

NO.8 Using the CUSTOMERS table, you need to generate a report that shows 50% of each credit
amount in each income level. The report should NOT show any repeated credit amounts in each income
level.
Which query would give the required result?
A. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50
AS "50% Credit Limit"
FROM customers;
B. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50
AS "50% Credit Limit"
FROM customers;
C. SELECT DISTINCT cust_income_level ' ' cust_credit_limit * 0.50
AS "50% Credit Limit"
FROM customers;
D. SELECT cust_income_level ' ' cust_credit_limit * 0.50 AS "50% Credit Limit"
FROM customers;
Answer: C

Oracle   1Z0-051자격증   1Z0-051인증

NO.9 Which SQL statements would display the value 1890.55 as $1,890.55? (Choose three .)
A. SELECT TO_CHAR(1890.55,'$0G000D00')
FROM DUAL;
B. SELECT TO_CHAR(1890.55,'$9,999V99')
FROM DUAL;
C. SELECT TO_CHAR(1890.55,'$99,999D99')
FROM DUAL;
D. SELECT TO_CHAR(1890.55,'$99G999D00')
FROM DUAL;
E. SELECT TO_CHAR(1890.55,'$99G999D99')
FROM DUAL;
Answer: ADE

Oracle pdf   1Z0-051   1Z0-051 pdf   1Z0-051

NO.10 Examine the structure of the PROMOTIONS table:
name Null Type
PROMO_ID NOT NULL NUMBER(6)
PROMO_NAME NOT NULL VARCHAR2(30)
PROMO_CATEGORY NOT NULL VARCHAR2(30)
PROMO_COST NOT NULL NUMBER(10,2)
The management wants to see a report of unique promotion costs in each promotion category.
Which query would achieve the required result?
A. SELECT DISTINCT promo_cost, promo_category FROM promotions;
B. SELECT promo_category, DISTINCT promo_cost FROM promotions;
C. SELECT DISTINCT promo_cost, DISTINCT promo_category FROM promotions;
D. SELECT DISTINCT promo_category, promo_cost FROM promotions ORDER BY 1;
Answer: D

Oracle dumps   1Z0-051최신덤프   1Z0-051   1Z0-051   1Z0-051 dumps

NO.11 Evaluate the following query:
SQL> SELECT promo_name q'{'s start date was }' promo_begin_date
AS "Promotion Launches"
FROM promotions;
What would be the outcome of the above query?
A. It produces an error because flower braces have been used.
B. It produces an error because the data types are not matching.
C. It executes successfully and introduces an 's at the end of each promo_name in the output.
D. It executes successfully and displays the literal " {'s start date was } " for each row in the output.
Answer: C

Oracle   1Z0-051   1Z0-051자격증   1Z0-051   1Z0-051

NO.12 Which two statements are true regarding the USING and ON clauses in table joins? (Choose two.)
A. Both USING and ON clauses can be used for equijoins and nonequijoins.
B. A maximum of one pair of columns can be joined between two tables using the ON clause.
C. The ON clause can be used to join tables on columns that have different names but compatible data
types.
D. The WHERE clause can be used to apply additional conditions in SELECT statements containing the
ON or the USING clause.
Answer: CD

Oracle덤프   1Z0-051   1Z0-051시험문제   1Z0-051최신덤프   1Z0-051 dumps

NO.13 Which statement is true regarding the INTERSECT operator?
A. It ignores NULL values.
B. Reversing the order of the intersected tables alters the result.
C. The names of columns in all SELECT statements must be identical.
D. The number of columns and data types must be identical for all SELECT statements in the query.
Answer: D

Oracle pdf   1Z0-051   1Z0-051   1Z0-051자격증

NO.14 View the Exhibit and examine the data in the CUSTOMERS table.
Evaluate the following query:
SQL> SELECT cust_name AS "NAME", cust_credit_limit/2 AS MIDPOINT,MIDPOINT+100 AS "MAX
LOWER LIMIT"
FROM customers;
The above query produces an error on execution.
What is the reason for the error?
A. An alias cannot be used in an expression.
B. The a lias NAME should not be enclosed with in double quotation marks .
C. The MIDPOINT+100 expression gives an error because CUST_CREDIT_LIMIT contains NULL
values.
D. The a lias MIDPOINT should be enclosed with in double quotation marks for the
CUST_CREDIT_LIMIT/2 expression .
Answer: A

Oracle   1Z0-051 pdf   1Z0-051   1Z0-051

NO.15 Evaluate the following query:
SELECT INTERVAL '300' MONTH,
INTERVAL '54-2' YEAR TO MONTH,
INTERVAL '11:12:10.1234567' HOUR TO SECOND
FROM dual;
What is the correct output of the above query?
A. +25-00 , +54-02, +00 11:12:10.123457
B. +00-300, +54-02, +00 11:12:10.123457
C. +25-00 , +00-650, +00 11:12:10.123457
D. +00-300 , +00-650, +00 11:12:10.123457
Answer: A

Oracle dumps   1Z0-051   1Z0-051   1Z0-051

NO.16 Which three statements are true regarding the data types in Oracle Database 10g/11g? (Choose
three.)
A. Only one LONG column can be used per table.
B. A TIMESTAMP data type column stores only time values with fractional seconds.
C. The BLOB data type column is used to store binary data in an operating system file.
D. The minimum column width that can be specified for a VARCHAR2 data type column is one.
E. The value for a CHAR data type column is blank-padded to the maximum defined column width.
Answer: ADE

Oracle최신덤프   1Z0-051자격증   1Z0-051

NO.17 View the Exhibit and examine the structure of the SALES, CUSTOMERS, PRODUCTS, and TIMES
tables.
The PROD_ID column is the foreign key in the SALES table, which references the PRODUCTS table.
Similarly, the CUST_ID and TIME_ID columns are also foreign keys in the SALES table referencing the
CUSTOMERS and TIMES tables, respectively.
Evaluate the following CREATE TABLE command:
CREATE TABLE new_sales(prod_id, cust_id, order_date DEFAULT SYSDATE)
AS
SELECT prod_id, cust_id, time_id
FROM sales;
Which statement is true regarding the above command?
A. The NEW_SALES table would not get created because the DEFAULT value cannot be specified in the
column definition.
B. The NEW_SALES table would get created and all the NOT NULL constraints defined on the specified
columns would be passed to the new table.
C. The NEW_SALES table would not get created because the column names in the CREATE TABLE
command and the SELECT clause do not match.
D. The NEW_SALES table would get created and all the FOREIGN KEY constraints defined on the
specified columns would be passed to the new table.
Answer: B

Oracle   1Z0-051덤프   1Z0-051자격증   1Z0-051

NO.18 You need to produce a report where each customer's credit limit has been incremented by $1000. In
the output, t he customer's last name should have the heading Name and the incremented credit limit
should be labeled New Credit Limit. The column headings should have only the first letter of each word in
uppercase .
Which statement would accomplish this requirement?
A. SELECT cust_last_name Name, cust_credit_limit + 1000
"New Credit Limit"
FROM customers;
B. SELECT cust_last_name AS Name, cust_credit_limit + 1000
AS New Credit Limit
FROM customers;
C. SELECT cust_last_name AS "Name", cust_credit_limit + 1000
AS "New Credit Limit"
FROM customers;
D. SELECT INITCAP(cust_last_name) "Name", cust_credit_limit + 1000
INITCAP("NEW CREDIT LIMIT")
FROM customers;
Answer: C

Oracle dumps   1Z0-051 pdf   1Z0-051   1Z0-051 dumps   1Z0-051최신덤프

NO.19 Examine the structure of the SHIPMENTS table:
name Null Type
PO_ID NOT NULL NUMBER(3)
PO_DATE NOT NULL DATE
SHIPMENT_DATE NOT NULL DATE
SHIPMENT_MODE VARCHAR2(30)
SHIPMENT_COST NUMBER(8,2)
You want to generate a report that displays the PO_ID and the penalty amount to be paid if the
SHIPMENT_DATE is later than one month from the PO_DATE. The penalty is $20 per day.
Evaluate the following two queries:
SQL> SELECT po_id, CASE
WHEN MONTHS_BETWEEN (shipment_date,po_date)>1 THEN
TO_CHAR((shipment_date - po_date) * 20) ELSE 'No Penalty' END PENALTY
FROM shipments;
SQL>SELECT po_id, DECODE
(MONTHS_BETWEEN (po_date,shipment_date)>1,
TO_CHAR((shipment_date - po_date) * 20), 'No Penalty') PENALTY
FROM shipments;
Which statement is true regarding the above commands?
A. Both execute successfully and give correct results.
B. Only the first query executes successfully but gives a wrong result.
C. Only the first query executes successfully and gives the correct result.
D. Only the second query executes successfully but gives a wrong result.
E. Only the second query executes successfully and gives the correct result.
Answer: C

Oracle   1Z0-051자격증   1Z0-051 dumps   1Z0-051자료   1Z0-051덤프   1Z0-051기출문제

NO.20 View the Exhibit and examine the structure of the PRODUCTS table.
All products have a list price.
You issue the following command to display the total price of each product after a discount of 25% and a
tax of 15% are applied on it. Freight charges of $100 have to be applied to all the products.
SQL>SELECT prod_name, prod_list_price -(prod_list_price*(25/100))
+(prod_list_price -(prod_list_price*(25/100))*(15/100))+100
AS "TOTAL PRICE"
FROM products;
What would be the outcome if all the parenthese s are removed from the above statement?
A. It produces a syntax error.
B. The result remains unchanged.
C. The total price value would be lower than the correct value.
D. The total price value would be higher than the correct value.
Answer: B

Oracle dump   1Z0-051 dump   1Z0-051기출문제   1Z0-051 dump

ITexamdump의 00M-503덤프의 VCE테스트프로그램과 70-489덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-461시험에 대비한 고품질 덤프와 MSC-431시험 최신버전덤프를 제공해드립니다. 최고품질 700-104시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z0-051.html

Oracle 인증 1Z0-043 덤프

ITExamDump 제공 Oracle 1Z0-043시험덤프자료가 광범한 시험준비인사들의 찬양을 받은지 하루이틀일이 아닙니다.이렇게 많은 분들이ITExamDump 제공 Oracle 1Z0-043덤프로 시험을 통과하여 자격증을 취득하였다는것은ITExamDump 제공 Oracle 1Z0-043덤프가 믿을만한 존재라는것을 증명해드립니다. 덤프에 있는 문제만 열심히 공부하시면 시험통과 가능하기에 시간도 절약해줄수있어 최고의 믿음과 인기를 받아왔습니다. Oracle 1Z0-043 시험을 봐야 하는 분이라면ITExamDump를 한번 믿어보세요. ITExamDump도움으로 후회없이 멋진 IT전문가로 거듭날수 있을것입니다.

ITExamDump의 Oracle인증 1Z0-043시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Oracle인증 1Z0-043덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Oracle인증 1Z0-043시험을 통과하여 자격증을 취득하려면ITExamDump의 Oracle인증 1Z0-043덤프로 시험준비공부를 하세요.

Oracle인증 1Z0-043시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Oracle인증 1Z0-043덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. Oracle 인증1Z0-043시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Oracle 인증1Z0-043시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.

Oracle인증1Z0-043시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Oracle인증1Z0-043시험패스로 꿈을 이루어주는 사이트입니다. 우리는Oracle인증1Z0-043시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Oracle인증1Z0-043시험을 응시할 수 있는 자료입니다.

시험 번호/코드: 1Z0-043
시험 이름: Oracle (Oracle database 10g:Administration ii)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 186 문항
업데이트: 2014-04-28

1Z0-043 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-043.html

NO.1 View the Exhibit.
You executed the following command to perform a backup of the USERS tablespace:
RMAN>BACKUP TABLESPACE USERS;
Which type of backup would this command perform?
Exhibit:
A.backup set
B.image copy
C.incremental backup
D.None; the user receives on error indicating that the backup must be specified.
Answer: A

Oracle dump   1Z0-043기출문제   1Z0-043덤프   1Z0-043 dump   1Z0-043최신덤프

NO.2 You are using an Automatic Storage Management (ASM) instance to manage the files of your
production database. You have two disk groups, DG1 and DG2 with one device each.
In the parameter file of the production database, the following parameters have been specified:
DB_CREATE_ONLINE_LOG_DEST_1 = '+dg1'
DB_CREATE_ONLINE_LOG_DEST_2 = '+dg2'
What would be the impact of this setting?
A.When a new log group is added, it would have one member in each disk group.
B.When a new log group is added, it would have two members in each disk group.
C.When a new tablespace is added, it would have one data file in each disk group.
D.When a new log file is added, it would have one member spread across the disk groups.
Answer: A

Oracle dumps   1Z0-043   1Z0-043   1Z0-043

NO.3 One of the tablespaces is read-only in your database. The loss of all control files forced you to re-create
the control file.
Which operation do you need to perform after re-creating the control file and opening the database?
A.drop and re-create the read-only tablespaces
B.rename the read-only data files to their correct file names
C.change the tablespace status from read/write to read-only
D.re-create the read-only tablespace because it is automatically removed
Answer: B

Oracle   1Z0-043최신덤프   1Z0-043기출문제   1Z0-043

NO.4 In your database, online redo log files are multiplexed and one of the members in a group is lost due to
media failure? How would you recover the lost redo log member?
A.import the database from the last export
B.restore all the members in the group from the last backup
C.drop the lost member from the database and then add a new member to the group
D.restore all the database files from the backup and then perform a complete recovery
E.restore all the database files from the backup and then perform an incomplete recovery
Answer: C

Oracle pdf   1Z0-043   1Z0-043시험문제   1Z0-043

NO.5 You are using Oracle Database 10g. Which statement regarding an incomplete recovery is true?
A.You do not need to restore all the data files.
B.You do not need to open the database with the RESETLOGS operation
C.You do not need to perform a full backup after the RESETLOGS operation.
D.You do not need to recover all the data files to the same system change number (SCN).
Answer: C

Oracle최신덤프   1Z0-043 dump   1Z0-043 dumps   1Z0-043기출문제   1Z0-043시험문제

NO.6 Immediately after adding a new disk to or removing an existing disk from an Automatic Storage
Management (ASM) instance, you find that the performance of the database decreases initially, until the
addition or removal process is completed. Performance then gradually returns to normal levels.
Which two activities could you perform to maintain a consistent performance of the database while adding
or removing disks? (Choose two.)
A.increase the number of checkpoint processes
B.define the POWER option while adding or removing the disks
C.increase the number of DBWR processes by setting up a higher value for DB_WRITER_PROCESSES
D.increase the number of slave database writer processes by setting up a higher value for
DBWR_IO_SLAVES
E.increase the number of ASM Rebalance processes by setting up a higher value for
ASM_POWER_LIMIT during the disk addition or removal
Answer: BE

Oracle최신덤프   1Z0-043   1Z0-043 dump

NO.7 You observe that a database performance has degraded over a period of time. While investigating the
reason, you find that the size of the database buffer cache is not large enough to cache all the needed
data blocks.
Which advisory component would you refer to, in order to determine that required size of the database
buffer cache?
A.Memory Advisor
B.Segment Advisor
C.SQL Tuning Advisor
D.SQL Access Advisor
E.Automatic Database Diagnostic Monitor (ADDM)
Answer: A

Oracle최신덤프   1Z0-043   1Z0-043 pdf

NO.8 You are performing a block media recovery on the tools01.dbf data file in the SALES database using
RMAN. Which two statements are correct in this scenario? (Choose two.)
A.You must ensure that the SALES database is mounted or open.
B.You must restore a backup control file to perform a block media recovery.
C.You must take the tools01.dbf data file offline before you start a block media recovery.
D.You must put the database in NOARCHIVELOG mode to perform a block media recovery.
E.You can perform only a complete media recovery of individual blocks, point-in-time recovery of
individual data blocks is not supported.
Answer: AE

Oracle기출문제   1Z0-043시험문제   1Z0-043자격증

NO.9 View the Exhibit.
In your production database, the total waits and the time waited for log file parallel write are significantly
high. While investigating the reason, you find that there are three redo log groups with two members in
each group, and all redo log members are places on a single physical disk.
What action would you take to minimize the waits?
Exhibit:
A.start the log writer slave processes
B.increase the number of redo log files
C.increase the size of the redo log buffer
D.place the redo log files on the different disks
E.increase the number of log writer processes
Answer: D

Oracle   1Z0-043시험문제   1Z0-043   1Z0-043

NO.10 You executed the following query:
SELECT operation, undo_sql, table_name
FROM flashback_transaction_query
Which statement is correct regarding the query output?
A.It would return information regarding only the last committed transaction.
B.It would return only the active transactions in all the undo segments in the database.
C.It would return only the committed transactions in all the undo segments in the database.
D.It would return both active and committed transactions in all the undo segments in the database.
E.It would return information regarding the transactions that began and were committed in the last 30
minutes.
Answer: D

Oracle   1Z0-043 dump   1Z0-043

NO.11 You work as a database administrator at certkiller.com. Your database is open and running in
ARCHIVELOG mode. You take RMAN full backups every Sunday night. On Monday morning, while
querying the user1.employees table, you receive the following error message:
01578. ORACLE data block corrupted (file # 5, block # 51)
ORA-01110: data file 5: '/u01/app/oracle/oradata/orcl/example01.dbf'
You need to rectify the corruption while ensuring the following:
The data file should remain online.
The mean time to recover (MTTR) should be minimal.
You are not using a backup control file and all the archived logs are accessible. Which option would you
choose?
A.flash back the corrupted blocks
B.use the DBMS_REPAIR package
C.use the RMAN TSPITR command
D.use the RMAN BLOCKRECOVER command
E.use the RESTORE DATABASEand RECOVER DATABASE commands
F.investigate the time at which the corruption occurred and perform a point-in-time recovery
Answer: D

Oracle dump   1Z0-043   1Z0-043   1Z0-043   1Z0-043

NO.12 You are working on an Oracle Database 10g database. You enabled the Flashback Database feature.
Which two statements regarding flashback logs are true? (Choose two.)
A.Flashback logs are not archived.
B.Flashback logs are maintained in redo log files.
C.Flashback logs are maintained in the Flash Recovery Area.
D.Flashback logs are used to maintain Flashback Database related errors.
E.Flashback logs need to be cleared manually after you disable Flashback Database.
Answer: AC

Oracle자격증   1Z0-043덤프   1Z0-043   1Z0-043   1Z0-043

NO.13 You have set some of the initialization parameters as:
DB_BLOCK_SIZE = 8KB
SGA_MAX_SIZE = 2GB
SGA_TARGET = 0
SHARED_POOL_SIZE = 120MB
DB_CACHE_SIZE = 896MB
STREAM_POOL_SIZE = 0
LARGE_POOL_SIZE = 110 MB
Which two statements are correct? (Choose two.)
A.You cannot set a value for the DB_8K_CACHE_SIZE parameter.
B.If you increase the size of the large pool to 120 MB, then the memory allocated to the shared pool will
be reduced to 110 MB.
C.If the value for SGA_TARGET is changed to 1 GB and SHARED_POOL_SIZE is set to 120 MB, then
memory cannot be taken from the shared pool, even if the shared pool has free space available.
D.If an application attempts to allocate more than 120 MB from the shared pool and free space is
available in the buffer pool, then the free space from the buffer pool is allocated to the shared pool.
Answer: AC

Oracle   1Z0-043   1Z0-043   1Z0-043   1Z0-043 dump

NO.14 The current time is 12:00 noon. You want to recover the USERS tablespace from a failure that
occurred at 11:50 a.m.You discover that the only member of an unarchived redo log group containing
information from 11:40 a.m. onwards is corrupt.
With reference to this scenario, if you are not using Recovery Manager (RMAN), which recovery method
would you use?
A.time-based recovery
B.log sequence recovery
C.cancel-based recovery
D.change-based recovery
Answer: C

Oracle dump   1Z0-043자료   1Z0-043   1Z0-043시험문제   1Z0-043

NO.15 You work as a database administrator at certkiller.com. In your production database there is a job,
CALC_STAT, which has been scheduled to run every Friday at 5.00 p.m.CALC_STAT updates the
optimizer statistics for the objects owned by the APPS schema. You want the task to be generic, thereby
allowing users to modify the attributes of the task at run time without affecting the original task.
Which component of Oracle Scheduler must you define to achieve this?
A.Window
B.Program
C.Job class
D.Window group
Answer: B

Oracle   1Z0-043 dump   1Z0-043   1Z0-043 dumps   1Z0-043   1Z0-043

NO.16 The current time zone for one of the user sessions is set to the database local time zone. For one
application, the user session requires the time zone to be set to the local operating system time zone
without affecting other user sessions.
Which two solutions could the user implement to achieve this objective? (Choose two.)
A.use the ALTER SYSTEM command to change the time zone
B.use the ALTER SESSION command to change the time zone
C.use the ALTER DATABASE command to change the time zone
D.set the value for the operating system variable ORA_SDTZ on the client machine
E.set the value for the operating system variable ORA_SDTZ on the database server machine
Answer: BD

Oracle덤프   1Z0-043 dump   1Z0-043 dump   1Z0-043

NO.17 Consider the following configuration:
/devices/D1 is a member of disk group dgroupA.
/devices/D2 is a member of disk group dgroupA.
/devices/D3 is a member of disk group dgroupA.
You plan to add a new disk,/devices/D4 to the disk group dgroupA.
You execute the following command:
SQL> ALTER DISKGROUP dgroupA ADD DISK '/devices/D*';
Which task would be accomplished by the command?
A.The command adds the new disk, D4, to the disk group.
B.The command would result in an error because the is no disk by the name "'/devices/D*'"
C.The command will be ignored because disks starting with "D" are already members of the disk group.
D.The command would result in an error because no wildcard characters can be used in the disk name.
E.The command first detaches all the member disks starting with "D", and the reattaches them including
the new disk.
Answer: A

Oracle   1Z0-043   1Z0-043   1Z0-043자료

NO.18 You lost the PRODSTD tablespace, which was read/write. The tablespace was read-only when the last
backup was performed. How would you recover the tablespace?
A.restore the tablespace from the backup; there is no need to apply the redo information
B.restore the full database to recover the data up to the point when you performed the backup
C.restore the tablespace from the backup and then perform a recovery using the backup control file
D.restore the tablespace from the backup and then recover the tablespace; all the redo information from
the point when the tablespace was made read/write is applied
Answer: D

Oracle   1Z0-043   1Z0-043자격증

NO.19 View the Exhibit and examine the Resource Manager settings for the groups at different levels.
Which two effects would be the result of this setting? (Choose two.)
Exhibit:
A.The members of LOW_GROUP would get more priority than those of OTHER_GROUPS.
B.The members of SYS_GROUP would get most of the CPU allocation at level 1.
C.The members of LOW_GROUP would get most of the CPU allocation because it has CPU allocation at
two different levels.
D.The members of LOW_GROUP would get no CPU allocation at level1 if the members of
OTHER_GROUPS are using all the CPU at level 2.
E.The members of SYS_GROUP would get no CPU allocation at level 1 if the members of
OTHER_GROUPS are using all the CPU at level 2.
Answer: AB

Oracle인증   1Z0-043   1Z0-043 pdf   1Z0-043

NO.20 An RMAN backup job fails, displaying the following error:
ORA-19809: limit exceeded for recovery files
Your analysis shows that the Flash Recovery area is full. Which two actions could you take to resolve the
error and avoid this error in the future? (Choose two.)
A.take the backup of the flash recovery area less frequently
B.increase the value of the UNDO_RETENTION initialization parameter
C.change the value of the WORKAREA_SIZE_POLICY initialization parameter to AUTO
D.change the backup retention policy to retain the backups for a smaller period of time
E.increase the value of the DB_RECOVERY_FILE_DEST_SIZE initialization parameter
F.increase the value of the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter
Answer: DE

Oracle dumps   1Z0-043   1Z0-043 pdf

ITexamdump의 C_HANAIMP131덤프의 VCE테스트프로그램과 1z0-599덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C-TSCM62-65시험에 대비한 고품질 덤프와 400-051시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-466시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z0-043.html

Oracle 자격증 1Z0-020 시험문제와 답

ITExamDump Oracle인증1Z0-020시험덤프 구매전 구매사이트에서 무료샘플을 다운받아 PDF버전 덤프내용을 우선 체험해보실수 있습니다. 무료샘플을 보시면ITExamDump Oracle인증1Z0-020시험대비자료에 믿음이 갈것입니다.고객님의 이익을 보장해드리기 위하여ITExamDump는 시험불합격시 덤프비용전액환불을 무조건 약속합니다. ITExamDump의 도움으로 더욱 많은 분들이 멋진 IT전문가로 거듭나기를 바라는바입니다.

Oracle인증1Z0-020시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.Oracle인증1Z0-020시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.Oracle인증1Z0-020시험은 여러분이 it지식테스트시험입니다.

ITExamDump의Oracle인증 1Z0-020 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Oracle인증 1Z0-020덤프로Oracle인증 1Z0-020시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Oracle인증 1Z0-020덤프는 실제Oracle인증 1Z0-020시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.

시험 번호/코드: 1Z0-020
시험 이름: Oracle (Oracle8l:new features for administrators)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 83 문항
업데이트: 2014-04-28

자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. Oracle인증 1Z0-020시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의Oracle인증 1Z0-020덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.

ITExamDump의 연구팀에서는Oracle 1Z0-020인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Oracle 1Z0-020덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Oracle 1Z0-020이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Oracle 1Z0-020시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

ITExamDump의 Oracle 인증 1Z0-020시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. Oracle 인증 1Z0-020덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.

Oracle 1Z0-020인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. Oracle 1Z0-020덤프는ITExamDump제품이 최고랍니다.

1Z0-020 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-020.html

NO.1 What can you see when querying V$LOGMNR_CONTENTS?
A. The SQL statement run and the old image.
B. The SQL statement run, and the new image.
C. Only the redo generated by the current schema.
D. The SQL statement run, and the relevant undo SQL statement.
E. The old image and the new image of the row that was modified.
Answer: E

Oracle pdf   1Z0-020 dump   1Z0-020시험문제   1Z0-020   1Z0-020
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.

NO.2 Which two statements are true? (Choose two)
A. Dimensions are based on summaries.
B. The ALTER MATERIALIZED VIEW CONSIDER FRESH statement directs Oracle to consider the
materialized view fresh, and therefore eligible for query rewrite in the TRUSTED or STALE_TOLERATED
mode only.
C. Summaries without dimensions are used for faster aggregation.
D. Additional query rewrites at a higher level of aggregation can take place if summaries are created at
the lowest level of aggregation.
Answer: AD

Oracle자격증   1Z0-020자료   1Z0-020

NO.3 Which two factors can influence the time taken for instance recovery? (Choose two)
A. Size of the redo log buffer.
B. Value of FAST_START_TO_TARGET
C. Size of the system tablespace.
D. Value of RECOVERY_PARALLELISM
E. The number of archived redo logs that have to be read.
F. The number of tables stored in the database buffer cache at the moment of failure.
Answer: BD

Oracle시험문제   1Z0-020   1Z0-020   1Z0-020자격증   1Z0-020인증

NO.4 Which tool, integrated with Oracle universal installer, can be used by third-party vendors to install their
products as art of an Oracle installation?
A. Oracle Software Packager.
B. Java Run-Time environment.
C. Database migration assistant.
D. Optimal flexible architecture.
Answer: A

Oracle인증   1Z0-020인증   1Z0-020덤프

NO.5 Which parameter would you use to set up archiving to a remote machine?
A. LOG_ARCHIVE_DEST
B. LOG_ARCHIVE_DEST_2
C. LOG_ARCHIVE_REMOTE_DEST
D. ARCHIVE_REMOTE_DEST
Answer: A

Oracle   1Z0-020 dump   1Z0-020   1Z0-020   1Z0-020기출문제

NO.6 Which two statements are true? (Choose two)
A. Composite partitioning supports local indexes.
B. Composite partitioning supports hash-partitioned global indexes.
C. Composite partitioning supports range-partitioned global indexes
D. Composite partitioning supports composite-partitioned global indexes.
Answer: BD

Oracle   1Z0-020   1Z0-020자격증   1Z0-020   1Z0-020

NO.7 Which two options are valid for LOBs during their creation? (Choose two)
A. REDO
B. NOREDO
C. LOGGING
D. NOLOGGING
E. RECOVERABLE
F. UNRECEOVERABLE
Answer: CD

Oracle pdf   1Z0-020 pdf   1Z0-020

NO.8 Which tablespace stores the segment of a temporary table?
A. The default tablespace for user SYS.
B. The temporary tablespace for user SYS.
C. The default tablespace for the current user.
D. The temporary tablespace for the current user.
Answer: D

Oracle dumps   1Z0-020최신덤프   1Z0-020

NO.9 Examine this command:ALTER SYSTEM SET USESTORED_OUTLINE = TRUE; Which outline
category will be used?
A. SYS
B. OUTLINE
C. TRUE
D. DEFAULT
Answer: D

Oracle   1Z0-020자료   1Z0-020   1Z0-020자격증   1Z0-020덤프   1Z0-020자격증

NO.10 You set the PARALLEL_AUTOMATIC_TUNING initialization parameter to FALSE. What happens?
(Choose two)
A. Parallel execution buffers are allocated from the large pool.
B. Parallel execution buffers are allocated from the shared pool.
C. Only tables with a degree of parallelism specified will be scanned in parallel.
D. A load balancing algorithm will be used to distribute evenly load across nodes in a multi instance PQ
environment.
Answer: BC

Oracle dumps   1Z0-020시험문제   1Z0-020   1Z0-020   1Z0-020자료

ITexamdump의 70-466덤프의 VCE테스트프로그램과 9L0-064덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 BCP-340시험에 대비한 고품질 덤프와 MB5-700시험 최신버전덤프를 제공해드립니다. 최고품질 C-TSCM62-65시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z0-020.html

1Z0-047 시험문제 덤프 Oracle 자격증

Oracle인증 1Z0-047 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. Oracle인증 1Z0-047 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는Oracle인증 1Z0-047 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.

ITExamDump는 많은 IT인사들이Oracle인증시험에 참가하고 완벽한1Z0-047인증시험자료로 응시하여 안전하게Oracle 1Z0-047인증시험자격증 취득하게 하는 사이트입니다. Pass4Tes의 자료들은 모두 우리의 전문가들이 연구와 노력 하에 만들어진 것이며.그들은 자기만의 지식과 몇 년간의 연구 경험으로 퍼펙트하게 만들었습니다.우리 덤프들은 품질은 보장하며 갱신 또한 아주 빠릅니다.우리의 덤프는 모두 실제시험과 유사하거나 혹은 같은 문제들임을 약속합니다.ITExamDump는 100% 한번에 꼭 고난의도인Oracle인증1Z0-047시험을 패스하여 여러분의 사업에 많은 도움을 드리겠습니다.

ITExamDump 에서 출시한 Oracle인증1Z0-047시험덤프는 100%시험통과율을 보장해드립니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한Oracle인증1Z0-047덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다. 구매전 PDF버전무료샘플로ITExamDump제품을 체험해보고 구매할수 있기에 신뢰하셔도 됩니다. 시험불합격시 불합격성적표로 덤프비용을 환불받을수 있기에 아무런 고민을 하지 않으셔도 괜찮습니다.

비스를 제공해드려 아무런 걱정없이 시험에 도전하도록 힘이 되어드립니다. ITExamDump덤프를 사용하여 시험에서 통과하신 분이 전해주신 희소식이 ITExamDump 덤프품질을 증명해드립니다.

ITExamDump의 Oracle인증 1Z0-047시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Oracle인증 1Z0-047덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Oracle인증 1Z0-047시험을 통과하여 자격증을 취득하려면ITExamDump의 Oracle인증 1Z0-047덤프로 시험준비공부를 하세요.

Oracle 1Z0-047인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.

안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미Oracle 1Z0-047인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의Oracle 1Z0-047문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Oracle 1Z0-047인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.

시험 번호/코드: 1Z0-047
시험 이름: Oracle (Oracle Database SQL Expert)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 260 문항
업데이트: 2014-04-28

1Z0-047 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-047.html

NO.1 View the Exhibit and examine the structure of the EMP table which is not partitioned and not an
index-organized table. Evaluate the following SQL statement: ALTER TABLE emp DROP COLUMN
first_name; Which two statements are true regarding the above command? (Choose two.)
A.The FIRST_NAME column would be dropped provided it does not contain any data.
B.The FIRST_NAME column would be dropped provided at least one or more columns remain in the table.
C.The FIRST_NAME column can be rolled back provided the SET UNUSED option is added to the above
SQL statement.
D.The FIRST_NAME column can be dropped even if it is part of a composite PRIMARY KEY provided the
CASCADE option is used.
Answer:B D

Oracle   1Z0-047 dumps   1Z0-047   1Z0-047   1Z0-047

NO.2 Evaluate the following CREATE SEQUENCE statement: CREATE SEQUENCE seq1 START WITH 100
INCREMENT BY 10 MAXVALUE 200 CYCLE NOCACHE; The sequence SEQ1 has generated numbers
up to the maximum limit of 200. You issue the following SQL statement: SELECT seq1.nextval FROM
dual; What is displayed by the SELECT statement?
A.1
B.10
C.100
D.an error
Answer:A

Oracle   1Z0-047   1Z0-047   1Z0-047   1Z0-047인증

NO.3 View the Exhibit and examine PRODUCTS and ORDER_ITEMS tables. You executed the following
query to display PRODUCT_NAME and the number of times the product has been ordered: SELECT
p.product_name, i.item_cnt FROM (SELECT product_id, COUNT (*) item_cnt FROM order_items
GROUP BY product_id) i RIGHT OUTER JOIN products p ON i.product_id = p.product_id; What would
happen when the above statement is executed?
A.The statement would execute successfully to produce the required output.
B.The statement would not execute because inline views and outer joins cannot be used together.
C.The statement would not execute because the ITEM_CNT alias cannot be displayed in the outer query.
D.The statement would not execute because the GROUP BY clause cannot be used in the inline view.
Answer:A

Oracle   1Z0-047자료   1Z0-047   1Z0-047기출문제   1Z0-047   1Z0-047 dumps

NO.4 View the Exhibit and examine the descriptions of ORDER_ITEMS and ORDERS tables. You want to
display the CUSTOMER_ID, PRODUCT_ID, and total (UNIT_PRICE multiplied by QUANTITY) for the
order placed. You also want to display the subtotals for a CUSTOMER_ID as well as for a PRODUCT_ID
for the last six months. Which SQL statement would you execute to get the desired output?
A.SELECT o.customer_id, oi.product_id, SUM(oi.unit_price*oi.quantity) "Total" FROM order_items oi
JOIN orders o ON oi.order_id=o.order_id GROUP BY ROLLUP (o.customer_id,oi.product_id) WHERE
MONTHS_BETWEEN(order_date, SYSDATE) <= 6;
B.SELECT o.customer_id, oi.product_id, SUM(oi.unit_price*oi.quantity) "Total" FROM order_items oi
JOIN orders o ON oi.order_id=o.order_id GROUP BY ROLLUP (o.customer_id,oi.product_id) HAVING
MONTHS_BETWEEN(order_date, SYSDATE) <= 6;
C.SELECT o.customer_id, oi.product_id, SUM(oi.unit_price*oi.quantity) "Total" FROM order_items oi
JOIN orders o ON oi.order_id=o.order_id GROUP BY ROLLUP (o.customer_id, oi.product_id) WHERE
MONTHS_BETWEEN(order_date, SYSDATE) >= 6;
D.SELECT o.customer_id, oi.product_id, SUM(oi.unit_price*oi.quantity) "Total" FROM order_items oi
JOIN orders o ON oi.order_id=o.order_id WHERE MONTHS_BETWEEN(order_date, SYSDATE) <= 6
GROUP BY ROLLUP (o.customer_id, oi.product_id) ;
Answer:D

Oracle   1Z0-047   1Z0-047   1Z0-047 dumps

NO.5 View the Exhibit and examine the description of the ORDERS table. Which two WHERE clause
conditions demonstrate the correct usage of conversion functions? (Choose two.)
A.WHERE order_date > TO_DATE('JUL 10 2006','MON DD YYYY')
B.WHERE TO_CHAR(order_date,'MON DD YYYY') = 'JAN 20 2003'
C.WHERE order_date > TO_CHAR(ADD_MONTHS(SYSDATE,6),'MON DD YYYY')
D.WHERE order_date IN ( TO_DATE('Oct 21 2003','Mon DD YYYY'), TO_CHAR('NOV 21 2003','Mon DD
YYYY') )
Answer:A B

Oracle dump   1Z0-047최신덤프   1Z0-047   1Z0-047덤프   1Z0-047최신덤프

NO.6 View the Exhibit and examine the description of the CUSTOMERS table. You want to add a constraint
on the CUST_FIRST_NAME column of the CUSTOMERS table so that the value inserted in the column
does not have numbers. Which SQL statement would you use to accomplish the task?
A.ALTER TABLE CUSTOMERS ADD CONSTRAINT cust_f_name
CHECK(REGEXP_LIKE(cust_first_name,'

Oracle 인증한 1Z0-610 덤프

ITExamDump 제공 Oracle 1Z0-610시험덤프자료가 광범한 시험준비인사들의 찬양을 받은지 하루이틀일이 아닙니다.이렇게 많은 분들이ITExamDump 제공 Oracle 1Z0-610덤프로 시험을 통과하여 자격증을 취득하였다는것은ITExamDump 제공 Oracle 1Z0-610덤프가 믿을만한 존재라는것을 증명해드립니다. 덤프에 있는 문제만 열심히 공부하시면 시험통과 가능하기에 시간도 절약해줄수있어 최고의 믿음과 인기를 받아왔습니다. Oracle 1Z0-610 시험을 봐야 하는 분이라면ITExamDump를 한번 믿어보세요. ITExamDump도움으로 후회없이 멋진 IT전문가로 거듭날수 있을것입니다.

Oracle인증 1Z0-610시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은ITExamDump 의 Oracle인증 1Z0-610덤프를 알고 계시는지요? ITExamDump 의 Oracle인증 1Z0-610덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.

멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. Oracle인증 1Z0-610시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의Oracle인증 1Z0-610덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의Oracle인증 1Z0-610덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.

최근 더욱 많은 분들이Oracle인증1Z0-610시험에 도전해보려고 합니다. ITExamDump에서는 여러분들의 시간돠 돈을 절약해드리기 위하여 저렴한 가격에 최고의 품질을 지닌 퍼펙트한Oracle인증1Z0-610시험덤플르 제공해드려 고객님의 시험준비에 편안함을 선물해드립니다. ITExamDump제품을 한번 믿어보세요.

시험 번호/코드: 1Z0-610
시험 이름: Oracle (Siebel CRM OnDemand 2006 administrator Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 85 문항
업데이트: 2014-04-28

IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. Oracle 인증 1Z0-610시험은 아주 유용한 시험입니다. Oracle 인증1Z0-610시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Oracle 인증1Z0-610시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는Oracle 인증1Z0-610시험덤프는 시장에서 판매하고 있는Oracle 인증1Z0-610덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.

1Z0-610 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-610.html

NO.1 Your customer is concerned about the Siebel CRM OnDemand environment going down, negatively
affecting his business. Which of the following can you cite to reassure your customer that Siebel CRM
OnDemand is designed for High Availability? Choose three.
A.Clustered servers
B.Redundancy within the hardware and network components
C.Load Balancing
D.Database de-normalization
E.JavaScript usage
Answer: ABC

Oracle pdf   1Z0-610   1Z0-610 dumps   1Z0-610 pdf   1Z0-610

NO.2 Siebel CRM OnDemand calculates expected revenue based on the probability associated with the
sales stage and the opportunity revenue. Using the sales stage probabilities below, what is the expected
revenue of a $100,000 opportunity in the Qualified Lead stage?
Qualified Lead = 30%Building Vision = 50%Short List = 70%Negotiation = 90%Closed/Won = 100%
A.$3,000
B.$70,000
C.$30,000
D.$100,000
Answer: C

Oracle   1Z0-610시험문제   1Z0-610 dump

NO.3 Your customer is concerned about the Siebel CRM OnDemand environment providing the necessary
security to protect their data. Which of the following can you cite to reassure your customer that Siebel
CRM OnDemand is designed for High Security? Choose three.
A.Reliable high-bandwidth Internet access
B.Single-layer LAN architecture to isolate data
C.128-bit encryption through secure socket layer (SSL)
D.System of Wireless networks providing WiFi access points
E.Anti-virus protection at the server-level
Answer: ACE

Oracle시험문제   1Z0-610   1Z0-610

NO.4 What happens if you do not map every field in your source file during an import?
A.You receive a warning message, but can choose to continue without mapping the non-required fields
B.The Next button on the mapping step does not become active until all fields are mapped
C.You do not receive an alert, but no records will get imported into CRM OnDemand
D.You receive an alert, and cannot continue until all required and non-required fields are mapped
Answer: A

Oracle시험문제   1Z0-610   1Z0-610   1Z0-610

NO.5 Your company has decided to change the password requirements and force new policies into effect
immediately. As the Administrator, what must you do?
A.Click the Reset All Passwords button on the company Profile, and then modify the password controls.
B.Modify the password controls and distribute new default passwords to all users.
C.Modify the password controls only. Changes take effect with each users next login.
D.Modify the password controls and then click the Reset All Passwords button on the Company Profile.
Answer: D

Oracle자료   1Z0-610자료   1Z0-610   1Z0-610자료

NO.6 Bill Williams is a manager of a sales team. His role gives him Read/Create default access to accounts.
Jane Jones is a sales representative who reports to Bill Williams. Her role gives her Create-Only default
access to accounts, and Read/Edit/Delete owner access. Jane owns the ACE Industries account record
in Siebel CRM OnDemand.
Jane changes the owner on the ACE Industries account to Frank Ford, a sales representative who does
not report to Bill Williams, but to a sales manager on another team. What kind of access does Jane now
have to the ACE Industries record?
A.No Access
B.Read/Create
C.Read/Edit/Delete
D.Read-Only
Answer: A

Oracle시험문제   1Z0-610   1Z0-610

NO.7 By default, how are sales quotas tracked in CRM OnDemand?
A.Quotas are tracked on the Sales Quota Dashboard
B.Quotas are tracked on the My Sales Quota Report
C.Quotas are tracked through automatically generated forecasts
D.Quotas are tracked on the Opportunities screen
Answer: C

Oracle자격증   1Z0-610기출문제   1Z0-610   1Z0-610 pdf   1Z0-610

NO.8 Which of the following settings are available to the Administrator for setting sign-in and password
controls? Choose three.
A.Maximum number of sign-in attempts allowed
B.New password must be different from old password checkbox
C.Alpha-numeric password required checkbox
D.Minimum password length requirement
E.Maximum password length requirement
Answer: ABD

Oracle dump   1Z0-610   1Z0-610기출문제

NO.9 Your customer is concerned about the Siebel CRM OnDemand environment performing slowly,
negatively affecting her business. Which of the following can you cite to reassure your customer that
Siebel CRM OnDemand is designed for High Performance? Choose three.
A.Load Balancing
B.Extensive JavaScript usage
C.Redundancy within the hardware and network components
D.Database caching
E.Extensive indexing
Answer: ADE

Oracle dump   1Z0-610   1Z0-610   1Z0-610

NO.10 The first task in administering a company is verifying and updating the information contained in the
company profile. Where does the company information contained in the company profile initially come
from?
A.Information gathered from the .ini files installed on the users computer
B.Information provided during the initial sign-up for Siebel CRM OnDemand
C.Information provided by the account executive from Siebel
D.There is no information in the company profile before the Administrator updates the profile
Answer: B

Oracle최신덤프   1Z0-610   1Z0-610   1Z0-610최신덤프   1Z0-610

ITexamdump의 200-001덤프의 VCE테스트프로그램과 HP2-Z26덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 FCNSP.v5시험에 대비한 고품질 덤프와 000-619시험 최신버전덤프를 제공해드립니다. 최고품질 300-206시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z0-610.html

Oracle 1Z0-053 덤프

ITExamDump의Oracle인증 1Z0-053시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. Oracle인증 1Z0-053덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.

어떻게Oracle인증1Z0-053시험을 패스하느냐 에는 여러 가지 방법이 있습니다. 하지만 여러분의 선택에 따라 보장도 또한 틀립니다. 우리ITExamDump 에서는 아주 완벽한 학습가이드를 제공하며,Oracle인증1Z0-053시험은 아주 간편하게 패스하실 수 있습니다. ITExamDump에서 제공되는 문제와 답은 모두 실제Oracle인증1Z0-053시험에서나 오는 문제들입니다. 일종의 기출문제입니다.때문에 우리ITExamDump덤프의 보장 도와 정확도는 안심하셔도 좋습니다.무조건Oracle인증1Z0-053시험을 통과하게 만듭니다.우리ITExamDump또한 끈임 없는 덤프갱신으로 페펙트한Oracle인증1Z0-053시험자료를 여러분들한테 선사하겠습니다.

시험 번호/코드: 1Z0-053
시험 이름: Oracle (Oracle Database 11g: Administration II)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 698 문항
업데이트: 2014-04-28

한번에Oracle인증1Z0-053시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.

우리 ITExamDump사이트에서 제공되는Oracle인증1Z0-053시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Oracle인증1Z0-053시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.

1Z0-053 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-053.html

NO.1 Your database is in ARCHIVELOG mode. You have two online redo log groups, each of which contains
one redo member. When you attempt to start the database, you receive the following errors:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'D:\REDO01.LOG'
You discover that the online redo log file of the current redo group is corrupted.
Which statement should you use to resolve this issue?
A. ALTER DATABASE DROP LOGFILE GROUP 1;
B. ALTER DATABASE CLEAR LOGFILE GROUP 1;
C. ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 1;
D. ALTER DATABASE DROP LOGFILE MEMBER 'D:\REDO01.LOG';
Answer: C

Oracle인증   1Z0-053   1Z0-053

NO.2 You are working on a CATDB database that contains an Oracle Database version 11.1 catalog schema
owned by the user RCO11. The INST1 database contains an Oracle Database version 10.1 catalog
schema owned by the user RCAT10.
You want the RMAN to import metadata for database IDs 1423241 and 1423242, registered in RCAT10,
into the recovery catalog owned by RCO11. You also want to deregister them from the catalog after import.
You executed the following commands to achieve this:
RMAN> CONNECT CATALOG rco11/password@catdb
RMAN> IMPORT CATALOG rcat10/oracle@inst1 DBID=1423241,1423242;
What happens if the RCO11 catalog has scripts with the same name as that of the scripts in RCAT10
catalog?
A. The scripts in the RCO11 catalog are overwritten.
B. RMAN renames the local stored scripts in the RCO11 catalog.
C. The RMAN session in which the command is executed aborts.
D. RMAN renames the global scripts that are imported from the RCAT10 catalog.
Answer: D

Oracle자격증   1Z0-053 dumps   1Z0-053   1Z0-053

NO.3 Which statement is true regarding online redefinition for the migration of BasicFile LOBs to SecureFile
LOBs?
A. It cannot be done in parallel.
B. It can be done at the table level or partition level.
C. It does not require additional storage because the operation is done online.
D. Local and global indexes are maintained automatically during the operation.
Answer: B

Oracle덤프   1Z0-053   1Z0-053기출문제   1Z0-053최신덤프

NO.4 View the Exhibit to examine the metrics with a threshold. Which statement is true regarding the
Number of Transactions (per second) metric?
A. Oracle uses statistical relevance to determine when an adaptive threshold has been breached for the
metric.
B. The statistics for the metric values observed over the baseline time period are not examined to
determine threshold values.
C. Oracle determines when an adaptive threshold has been breached based on the maximum value
captured by the baseline.
D. The total concurrent number of threshold violations, which must occur before an alert is raised for the
metric, has been set to zero.
Answer: A

Oracle최신덤프   1Z0-053자격증   1Z0-053   1Z0-053최신덤프   1Z0-053

NO.5 You create a new Automatic Database Diagnostic Monitor (ADDM) task:
instance_analysis_mode_task. To view the ADDM report, you use the following command:
SQL> SELECT dbms_addm.get_report('my_instance_analysis_mode_task') FROM dual;
You want to suppress ADDM output relating to Segment Advisor actions on user SCOTT's segments.
What would you do to achieve this?
A. Add a finding directive for the ADDM task.
B. Add a segment directive for the ADDM task.
C. Add a parameter directive for the ADDM task.
D. Disable the Segment Advisor from the Automatic Maintenance Task.
Answer: B

Oracle   1Z0-053인증   1Z0-053인증   1Z0-053 pdf   1Z0-053

NO.6 Which two statements are true regarding hot patching? (Choose two.)
A. It requires relinking of the Oracle binary.
B. It does not require database instance shutdown.
C. It can detect conflicts between two online patches.
D. It is available for installing all patches on all platforms.
E. It works only in a single database instance environment.
Answer: BC

Oracle   1Z0-053   1Z0-053   1Z0-053 dump   1Z0-053자료

NO.7 Which statement describes the information returned by the DBMS_SPACE.SPACE_USAGE procedure
for LOB space usage?
A. It returns space usage of only BasicFile LOB chunks.
B. It returns space usage of only SecureFile LOB chunks.
C. It returns both BasicFile and SecureFile LOB space usage for only nonpartitioned tables.
D. It returns both BasicFile and SecureFile LOB space usage for both partitioned and nonpartitioned
tables.
Answer: B

Oracle   1Z0-053인증   1Z0-053   1Z0-053 dumps   1Z0-053

NO.8 Examine the section of the Health Check report given below:
DBMS_HM.GET_RUN_REPORT('HM_RUN_1061')
Run Name : HM_RUN_1061 Run Id : 1061 Check Name : Data Block Integrity Check Mode :
REACTIVE Status : COMPLETED Start Time : 2007-05-12 22:11:02.032292 -07:00 End Time :
2007.05-12 22:11:20.835135 -07:00 Error Encountered : 0
Source Incident Id : 7418
Number of Incidents Created :0
Which two statements are true regarding the Health Check report? (Choose two.)
A. Health Check was performed manually.
B. Health Check was performed to check the disk image block corruptions.
C. Health Check was performed to check interblock and intersegment corruption.
D. Health Check was performed to verify the integrity of database files and report failures.
E. Health Check was performed by the Health Monitor automatically in response to a critical error.
Answer: AB

Oracle   1Z0-053 dump   1Z0-053자료   1Z0-053   1Z0-053   1Z0-053최신덤프

NO.9 You plan to have a larger moving window size for the default system-defined moving window baseline
because you want to use the adaptive threshold.
Which statement factors in this consideration while increasing the size of the moving window.?
A. The collection level for the AWR should be set to BASIC.
B. The moving window size must be less than Undo Retention.
C. The moving window size should be greater than the Automatic Workload Repository (AWR) retention
period.
D. The moving window size should be equal to or less than the Automatic Workload Repository (AWR)
retention period.
Answer: D

Oracle   1Z0-053 dump   1Z0-053 pdf

NO.10 The INV_HISTORY table is created using the command:
SQL>CREATE TABLE INV_HISTORY (inv_no NUMBER(3), inv_date DATE, inv_amt NUMBER(10,2))
partition by range (inv_date) interval
(numtoyminterval(1,'month')) (partition p0
values less than (to_date('01-01-2005','dd-mm-yyyy')), partition p1 values less than
(to_date('01-01-2006','dd-mm-yyyy')));
The following data has been inserted into the INV_HISTORY table :
INV_NO INV_DATE INV_AMT 1 30-dec-2004 1000 2 30-dec-2005 2000 3 1-feb-2006 3000 4 1-mar-2006
4000 5 1-apr-2006 5000
You would like to store the data belonging to the year 2006 in a single partition and issue the command:
SQL> ALTER TABLE inv_history MERGE PARTITIONS
FOR(TO_DATE('15-feb-2006','dd-mon-yyyy')), FOR(TO_DATE('15-apr-2006')) INTO PARTITION sys_py;
What would be the outcome of this command?
A. It executes successfully, and the transition point is set to '1-apr-2006'.
B. It executes successfully, and the transition point is set to '15-apr-2006'.
C. It produces an error because the partitions specified for merging are not adjacent.
D. It produces an error because the date values specified in the merge do not match the date values
stored in the table.
Answer: C

Oracle시험문제   1Z0-053자료   1Z0-053 dump

NO.11 While deploying a new application module, the software vendor ships the application software along
with appropriate SQL plan baselines for the new SQLs being introduced. Which two statements describe
the consequences? (Choose two.)
A. The plan baselines can be evolved over time to produce better performance.
B. The newly generated plans are directly placed into the SQL plan baseline without being verified.
C. The new SQL statements initially run with the plans that are known to produce good performance
under standard test configuration.
D. The optimizer does not generate new plans for the SQL statements for which the SQL plan baseline
has been imported.
Answer: AC

Oracle   1Z0-053   1Z0-053자격증   1Z0-053 pdf

NO.12 You are in the process of creating a virtual private catalog in your Oracle Database 11g database. The
PROD1, PROD2, and PROD3 Oracle Database 10g databases are registered in the base recovery
catalog. The database user who owns the base recovery catalog is CATOWNER. CATOWNER executes
the following command to grant privileges to a new user VPC1 using Oracle Database 11g RMAN
executables:
RMAN> GRANT CATALOG FOR DATABASE prod1, prod2 TO vpc1;
Then you issue the following commands:
RMAN> CONNECT CATALOG vpc1/oracle@catdb;
RMAN> SQL "EXEC catowner.dbms_rcvcat.create_virtual_catalog;"
What is the outcome of the above commands?
A. They execute and create a virtual catalog for pre-Oracle 11g clients.
B. They produce an error because PROD1 and PROD2 databases belong to the older version.
C. They produce an error because you need to connect as CATOWNER to execute this packaged
procedure.
D. They produce an error because you need to connect to the target database to execute this packaged
procedure.
Answer: A

Oracle   1Z0-053   1Z0-053기출문제

NO.13 A PL/SQL procedure queries only those columns of a redefined table that were unchanged by the
online table redefinition. What happens to the PL/SQL procedure after the online table redefinition?
A. It remains valid.
B. It becomes invalid for all options of online table redefinition but automatically gets revalidated the next
time it is used.
C. It becomes invalid for all options of online table redefinition and is automatically recompiled during
online redefinition of the table.
D. It becomes invalid only if the storage parameters have been modified and it automatically gets
revalidated the next time it is used.
Answer: A

Oracle dumps   1Z0-053자료   1Z0-053   1Z0-053시험문제   1Z0-053최신덤프

NO.14 View the Exhibit that sets the threshold for the Current Open Cursors Count metric. Why is the
Significance Level threshold type not available in the threshold setting?
A. because AWR baseline is not enabled
B. because Current Open Cursors Count is not a basic metric
C. because the STATISTICS_LEVEL parameter is set to BASIC
D. because the AWR baseline is a system-defined moving window baseline
Answer: B

Oracle   1Z0-053   1Z0-053

NO.15 Because of a logical corruption in your production database, you wanted to perform Tablespace Point
in Time Recovery (TSPITR). But before you start the recovery, you queried the
TS_PITR_OBJECTS_TO_BE_DROPPED view and realized that there are a large number of objects that
would be dropped when you start the recovery by using this method. You want to preserve these objects.
Which option must you use to perform TSPITR and preserve the object?
A. Perform Export before TSPITR and Import after TSPITR
B. Move objects to another schema that has the same tablespace assigned
C. Perform Incomplete Recovery before TSPITR with the Log Sequence Number (LSN)
D. Perform Incomplete Recovery before TSPITR with the System Change Number (SCN)
Answer: A

Oracle시험문제   1Z0-053자료   1Z0-053자격증   1Z0-053 pdf   1Z0-053최신덤프   1Z0-053

NO.16 You performed the RMAN database backup having a backupset key number 231 with the KEEP
FOREVER option.
After some days, you want to change the status of the database backup and you issued the following
command:
RMAN>CHANGE BACKUPSET 231 NOKEEP;
What is the implication of this command?
A. The backup is deleted.
B. The backup is marked unavailable.
C. The backup overrides the backup retention policy.
D. the backup becomes eligible for deletion according to the existing retention policy
Answer: D

Oracle   1Z0-053기출문제   1Z0-053 dumps   1Z0-053인증

NO.17 Consider the following scenario for your database:
-Backup optimization is enabled in RMAN. The recovery window is set to 7 days in RMAN. The most
recent backup to disk for the TOOLS tablespace was taken on November 3, 2007.
The TOOLS tablespace is read-only since November 4, 2007.
On November 23, 2007, you issue the RMAN command to back up the database to disk. Which statement
is true regarding the backup of the TOOLS tablespace?
A. The RMAN backup fails because the TOOLS tablespace is read-only
B. The RMAN skips the backup of the tablespace because backup optimization is enabled
C. The RMAN makes backup because optimization can be enabled only for backups to disk
D. The RMAN makes the backup because no backup of the tablespace exists within the seven day
window
Answer: D

Oracle   1Z0-053자료   1Z0-053

NO.18 Which three components does the Scheduler use for managing tasks within the Oracle environment?
(Choose three.)
A. a job
B. a program
C. a schedule
D. a PL/SQL procedure
Answer: ABC

Oracle기출문제   1Z0-053   1Z0-053 dump

NO.19 View the Exhibit and examine the resource consumption details for the current plan in use by the
database instance.
Which two statements are true based on the output? (Choose two.)
Exhibit:
A. An attempt to start a new session by the user belonging to DSS_QUERIES fails with an error
B. A user belonging to DSS_QUERIES can log in to a new session but the session will be queued
C. The CPU_WAIT_TIME column indicates the total time that sessions in the consumer group waited for
the CPU due to resource management
D. The CPU_WAIT_TIME column indicates the total time that sessions in the consumer group waited for
the CPU due to resource management, I/O waits, and latch or enqueue contention
Answer: BC

Oracle인증   1Z0-053인증   1Z0-053   1Z0-053   1Z0-053 pdf   1Z0-053

NO.20 You need to configure fine-grained access control to external network resources from within your
database. You create an access control list (ACL) using the DBMS_NETWORK_ACL_ADMIN package.
Which statement is true regarding the ACL created?
A. It is a list of remote database links stored in the XML file that are available to the users of the database.
B. It is a list of users and network privileges stored in the XML file according to which a group of users can
connect to one or more hosts.
C. It is a list of users and network privileges stored in the data dictionary according to which a group of
users can connect to one or more hosts.
D. It is the list of the host names or the IP addresses stored in the data dictionary that can connect to your
database through PL/SQL network utility packages such as UTL_TCP.
Answer: B

Oracle   1Z0-053 dumps   1Z0-053   1Z0-053덤프

ITexamdump의 HP2-B97덤프의 VCE테스트프로그램과 EX0-001덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J62시험에 대비한 고품질 덤프와 M2040-723시험 최신버전덤프를 제공해드립니다. 최고품질 E20-553시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/1Z0-053.html