Oracle인증 1Z0-519시험을 패스하기 위하여 잠을 설쳐가며 시험준비 공부를 하고 계신 분들은 이 글을 보는 즉시 공부방법이 틀렸구나 하는 생각이 들것입니다. ITExamDump의Oracle인증 1Z0-519덤프는 실제시험을 대비하여 제작한 최신버전 공부자료로서 문항수도 적합하여 불필요한 공부는 하지 않으셔도 되게끔 만들어져 있습니다.가격도 착하고 시험패스율 높은ITExamDump의Oracle인증 1Z0-519덤프를 애용해보세요. 놀라운 기적을 안겨드릴것입니다.
여러분은Oracle 1z0-584인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.
ITExamDump 에서는 최선을 다해 여러분이Oracle 1z0-593인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서Oracle 1z0-593덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로Oracle 1z0-593인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.
우리ITExamDump가 제공하는 최신, 최고의Oracle 1Z0-519시험관련 자료를 선택함으로 여러분은 이미 시험패스성공이라고 보실수 있습니다.
시험 이름: Oracle EBS R12.1 Inventory Essentials
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Z0-519시험
100% 합격율 보장
Q&A: 101 문항 1Z0-519교육
업데이트: 2014-05-13
1Z0-519시험: >>펼쳐보기
시험 이름: Oracle Fusion Human Capital Management 11g Human Resources Essentials
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1z0-584시험
100% 합격율 보장
Q&A: 129 문항 1z0-584자격증자료
업데이트: 2014-05-13
1z0-584시험: >>펼쳐보기
시험 이름: Oracle Real Application Clusters 11g Essentials
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1z0-593강좌
100% 합격율 보장
Q&A: 80 문항 1z0-593자격증덤프
업데이트: 2014-05-13
1z0-593강좌: >>펼쳐보기
ITExamDump의Oracle인증 1Z0-519덤프의 인지도는 아주 높습니다. 인지도 높은 원인은Oracle인증 1Z0-519덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITExamDump의Oracle인증 1Z0-519덤프로Oracle인증 1Z0-519시험에 도전해보세요.
1z0-593 덤프무료샘플다운로드하기: http://www.itexamdump.com/1z0-593.html
NO.1 Which of these is not recommended as the basis for an ASM disk in a shared storage
configuration?
A. Raw disk partition
B. NFS file
C. Raw logical volumes
D. iSCSI targets
Answer: A
Oracle 시험문제 1z0-593 기출문제 1z0-593 최신덤프 1z0-593 자료 1z0-593 인증덤프 1z0-593 덤프
Explanation:
*Block or raw devices are not supported by Oracle Universal Installer (OUI) or Database
Configuration Assistant (DBCA). However, manually configured raw or block devices are supported
by Oracle, but not recommended.
* Shared disk access requires some sort of networked storage
-
iSCSI (not D)
-
Fibre Channel/SCSI
-
NFS (not B)
*A logical volume issupported in less complicated configurations where a logical volume is mapped
to a LUN, or a logical volume uses disks or raw partitions.
NO.2 Which two options are checked by the Oracle Universal Installer, when you first install Oracle
Software on a system?
A. if the OFA-compliant path is available
B. oraInst.loc should exist
C. that the user running the installation has permissions to write to the designated path
D. that you are running OUI as a DBA user
Answer: A,B
Oracle 1z0-593 시험 1z0-593 IT국제자격증 1z0-593 Dump
Explanation:
A:
*When installing an OFA-compliant database using Oracle Universal Installer, ORACLE_BASE is
set to /pm/app/oracle by default.
*All Oracle products on CD-ROM are OFA-compliant; that is, Oracle Universal Installer places
Oracle products in directory locations that follow OFA guidelines
B: Every Oracle software installation has an associated Central Inventory where the details of all the
Oracle products installed on a host are registered. The Central Inventory is located in thedirectory
that the inventory pointer file specifies. Each Oracle software installation has its own Central
Inventory pointer file that is unknown to another Oracle software installation.
Default Inventory Pointer File Locations
PlatformDefault Inventory Pointer Location Linux LinuxPPC /etc/oraInst.loc AIX /etc/oraInst.loc
Solaris SPARC HPUX-IA64 HPUX-PARISC /var/opt/oracle/oraInst.loc Windows Windows.X64
Windows.IA64 HKEY_LOCAL_MACHINE/Software/Oracle/inst.loc
NO.3 Select two Clusterware administration tasks that must be performed as the root user.
A. List the location of the voting disks.
B. Check the health and viability of the Clusterware on all nodes.
C. Disable the Clusterware from automatic start at node reboot.
D. Start the Clusterware manually on one node.
E. Check the health of the Clusterware on one node.
Answer: A,D
Oracle 시험 1z0-593 기출문제 1z0-593 IT덤프 1z0-593
Explanation:
A:Voting disk management requires a valid and working OCR. Before you add, delete, replace, or
restore voting disks, run the ocrcheck command as root.
D: Example:
Restart the Oracle Clusterware stack in normal mode as root:
# crsctl start crs
NO.4 You are creating an Oracle Cluster database using DBCA. The "Memory size (SGA and PGA)"
field is supplied on value of 2000 MB. The default Block used for the database is __________.
A. 2 KB
B. 4 KB
C. 8 KB
D. 16 KB
E. 32 KB
Answer: C
Oracle 인증덤프 1z0-593 IT시험덤프 1z0-593 Dumps 1z0-593 시험자료 1z0-593 시험일정
Explanation:
Note: *In the Block Size list, enter the size in bytes or accept the default. Oracle Database data is
stored in these blocks. One data block corresponds to a specific number of bytes of physical space
on disk. While using pre-defined templates, this field is not enabled since the database will be
created with the default block size of 8 KB. But while using the custom option, you can change block
size. Selecting a block size other than the default 8 KB value requires advanced knowledge and
should only be done when absolutely required.
NO.5 Which two actions do you need to take in Oracle Grid Infrastructure 11g Release 2 to enable
debugging for the resource ora.docrac.vip?
A. Make sure you are logged in as a privileged user.
B. crsctldebug res ora.docrac1.vip:1
C. crsctlset log res ora.docrac1.vip:1
D. crsctldebug log res ora.docrac1.vip:0
Answer: A,C
Oracle 자격시험 1z0-593 dumps 1z0-593 최신덤프 1z0-593 IT국제자격증 1z0-593 IT자격증시험자료
Explanation:
A:You can use crsctl commands as the root user to enable dynamic debugging for the Oracle
Clusterware Cluster Ready Services (CRS), Oracle Cluster Registry (OCR), Cluster Synchronization
Services (CSS), and the Event Manager (EVM).
C: You can enable debugging for the CRS, OCR, CSS, and EVM modules and their components by
setting environment variables or by issuing crsctl debug commands using the following syntax:
crsctl debug log module_name component:debugging_level
Reference: Oracle Clusterware Administration and Deployment Guide,Component Level Debugging
NO.6 Once OUI recognizes a set of nodes in a cluster, which three choices does it offer when
installing the Oracle Database 11g Release 2 software?
A. You can only install the Oracle Database with the RAC option on selected nodes.
B. OUI forcesyouto configure ASM for shared storage before proceeding.
C. You can install the Oracle Database as a single instance or with the RAC option on all the nodes.
D. You can install the Oracle Database as a single instance or with the RAC option on selected nodes.
E. You can install Oracle RAC One Node.
Answer: B,D,E
Oracle 덤프자료 1z0-593 1z0-593 IT자격증시험 1z0-593 시험자료
Explanation:
B, D: Complete the prerequisite tasks for converting to an Oracle RAC database:
Oracle Clusterware and Oracle Database software is installed on all target nodes.
Oracle Clusterware is started.
(D)The Oracle Database binary is enabled for Oracle RAC on all target nodes.
(B) Shared storage is configured and accessible from all nodes.
User equivalency is configured for the operating system user performing the conversion.
Enterprise Manager agents are configured and running on all nodes, and are configured with the
cluster and host information.
The database being converted has been backed up successfully.
E:Installing Oracle RAC One Node is available starting with Oracle Database 11g Release 2
(11.2.0.2).
Note:
*By default, the standard Oracle Database 11g software installation process installs the Oracle
RAC option when OUI recognizes that you are performing the installation on a cluster.
NO.7 Which command lists all the service-related information for the specified service? (crmdb is
the cluster database name and crms is the service name)
A. #crsctl config services -d cmdb -s crms
B. #srvctlconfig service -d cmdb -s crms
C. #srvctl getenv service -d crmdb -s crms
D. #crsctl status service -d crm -s crm -v
Answer: B
Oracle 기출문제 1z0-593 PDF 1z0-593 IT국제자격증 1z0-593 최신덤프 1z0-593 국제공인자격증
Explanation:
*The srvctl config command displays the Oracle Restart configuration of the specified component or
set of components.
*srvctl config service For the specified database, displays the Oracle Restart configuration
information for the specified database service or for all database services
Incorrect: Not C: getenv
Gets and displays environment variables and their values from the Oracle Restart configuration for a
database, listener, or Oracle ASM instance.
srvctl getenv Summary
CommandDescription
*srvctl getenv asm Displays the configured environment variables for the Oracle ASM instance
*srvctl getenv database Displays the configured environment variables for the specified database
instance
*srvctl getenv listener Displays the configuredenvironment variables for the specified listener
Reference:SRVCTL Command Reference for Oracle Restart
NO.8 Which step will you have to perform on Windows to restore the OCR that you did not do on
Linux?
A. Identify existing backups with the -backup option
B. Use the Service Control Panel to stop services
C. Review the contents of the backup with the ocrdump command
D. Make sure that the restored OCR files are valid
Answer: B
Oracle 자격증덤프 1z0-593 자격증시험 1z0-593 시험자료 1z0-593 IT덤프 1z0-593 자격시험
Explanation:
See step 2) below. Restoring the Oracle Cluster Registry on Windows-Based Systems
Use the following procedure to restore the OCR on Windows-based systems:
cluvfy comp ocr -n all [-verbose]
Note:
Restoring the Oracle Cluster Registry on UNIX-Based SystemsUse the following procedure to
restore the OCR on UNIX-based systems:
Repeat this command on each node in your Oracle RAC cluster.
Note:
Prior to running the crsctl start crs command in step 4, run the following command to verify that all
processes except init.cssd fatal are inactive:
ps -ef|grep cssd
Repeat this command on each node in your Oracle RAC cluster.
Reference: Oracle Database Oracle Clusterware and Oracle Real Application Clusters
Administration and Deployment Guide
댓글 없음:
댓글 쓰기