여러분이 우리Microsoft MB6-821문제와 답을 체험하는 동시에 우리ITExamDump를 선택여부에 대하여 답이 나올 것입니다. 우리는 백프로 여러분들한테 편리함과 통과 율은 보장 드립니다. 여러분이 안전하게Microsoft MB6-821시험을 패스할 수 있는 곳은 바로 ITExamDump입니다.
인테넷에 검색하면 Microsoft MB6-821시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의Microsoft MB6-821제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.
ITExamDump는Microsoft인증MB6-821시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Microsoft인증MB6-821시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Microsoft인증MB6-821시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
시험 번호/코드: MB6-821
시험 이름: Microsoft (AX 2009 MorphX Solution Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2013-12-15
ITExamDump 는 완전히 여러분이 인증시험준비와 안전이 시험패스를 위한 완벽한 덤프제공사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 제품의 완성도도 다릅니다.그 말은 즉 알 맞춤 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편안하게 패스할 수 있습니다.많은 it인증관연 응시자들은 모두 우리ITExamDump가 제공하는 문제와 답 덤프로 자격증 취득을 했습니다.때문에 우리ITExamDump또한 업계에서 아주 좋은 이미지를 가지고 잇습니다
ITExamDump의Microsoft MB6-821인증시험의 자료 메뉴에는Microsoft MB6-821인증시험실기와Microsoft MB6-821인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의Microsoft MB6-821인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.
MB6-821 덤프무료샘플다운로드하기: http://www.itexamdump.com/MB6-821.html
NO.1 The following code creates an ODBC connection to an external database. Which block of code is valid
and can be inserted into the /*insert answer here*/ line?
If (odbcConnection)
{
sql ="SELECT * FROM MYTABLE WHERE FIELD =" + criteria + " ORDER BY FIELD1,FIELD2 ASC"
perm = new SqlStatementExecutePermission(sql);
perm.assert();
statement = odbcConnection.createStatement();
resultSet = statement.executeQuery(sql);
/*insert answer here*/
}
A.while (resultSet.next()){print resultSet.get(4);print
resultSet.get(3);}resultSet.close();statement.close();pause;
B.while (resultSet.next()){print resultSet.get(1);print resultSet.get(3);}pause;
C.while (resultSet.next()){print resultSet.getString(2);print resultSet.getString(1);}resultSet.close();pause;
D.while (resultSet.next()){print resultSet.getString(1);print resultSet.getString(3);}pause;
Answer: d
Microsoft MB6-821덤프 MB6-821 MB6-821시험문제 MB6-821자격증
NO.2 Which of the following strategies are appropriate to reduce locking of central records in the database?
A.Do not use ttsBegin and ttsCommit when accessing records which can increase the locking.
B.Set up the class to run on the server.
C.Set up the table to use Optimistic Concurrency Control (OCC).
D.Always specify an index to reduce the load on the database.
Answer: c
Microsoft MB6-821 dump MB6-821 MB6-821 dumps
NO.3 How can modifications be moved between a development and a test system?
Choose two that apply.
A.Export the modifications from the development system to a .xpo file and import it into the test system.
B.Copy the .aod and .ald files from the development application file directory to the test application file
directory.
C.Use the application merge tool in the test application, and specify the development application
directory.
D.Run the application upgrade wizard from the development application and specify the test application
file directory.
Answer: ab
Microsoft덤프 MB6-821 dumps MB6-821 MB6-821최신덤프 MB6-821 pdf
NO.4 Isaac, the Systems Developer, has created a new class which extends the RunBase Framework.
He needs to make the query visible on the dialog, for user interaction. Which methods will he need to
override to achieve this?
A.showQueryValues()
B.queryValuesVisible()
C.showQuery()
D.queryVisible()
Answer: a
Microsoft최신덤프 MB6-821 MB6-821 pdf MB6-821 MB6-821덤프
NO.5 Which of the following are methods on the Args class that will accept a string type as a parameter?
Choose two that apply.
A.caller()
B.name()
C.parm()
D.element()
Answer: bc
Microsoft MB6-821시험문제 MB6-821인증 MB6-821덤프
NO.6 Isaac, the Systems Developer, needs to run a form from his X++ code. Select the correct statement to
replace the /* insert answer here */ comment in the following code:
Args args;
FormRun formRun;
;
args = new args(formstr(inventTable));
formRun = classFactory.formRunClass(args);
/* insert answer here */
A.formRun.init();formRun.prompt();formRun.wait();
B.formRun.init();formRun.run();
C.formRun.init();formRun.run();formRun.prompt();
D.formRun.init();formRun.run();formRun.wait();
Answer: d
Microsoft MB6-821 MB6-821자료
NO.7 Isaac, the Systems Developer, wants to modify the method SalesLine.calcLineAmount(). He wants to
be sure that the change does not cause problems when it is used with the application. How can he find
out where it is used?
A.Use the Reverse Engineering tool
B.Use the Cross-Reference tool
C.Right-click on the method and select Find
D.Right-click on the method and select Compare
Answer: b
Microsoft pdf MB6-821 MB6-821 dumps MB6-821 MB6-821
NO.8 Which of the following are valid application object classes?
Choose three that apply.
A.Form
B.FormDesign
C.FormQueryDataSource
D.FormRun
Answer: abd
Microsoft dumps MB6-821덤프 MB6-821 MB6-821자료 MB6-821 MB6-821 dumps
NO.9 When writing a direct SQL statement, what would be the correct syntax to execute a statement and tell
the Code-Access Security layer that it is safe?
A.new
SqlStatementExecutePermission(sqlString).secure();stmt.executeQuery(sqlString);CodeAccessPermissi
on::revertSecure();
B.new
CodeAccessPermission(sqlString).assert();stmt.executeQuery(sqlString);CodeAccessPermission::revert
Assert();
C.new
SqlStatementExecutePermission(sqlString).assert();stmt.executeQuery(sqlString);SqlStatementExecute
Permission::revertAssert();
D.new
SqlStatementExecutePermission(sqlString).assert();stmt.executeQuery(sqlString);odeAccessPermission:
:revertAssert();
Answer: d
Microsoft최신덤프 MB6-821 MB6-821 MB6-821 dumps MB6-821시험문제
NO.10 Isaac, the Systems Developer, wants to debug code in the class SalesFormLetter when it is called from
the sales order form. What steps must he take to achieve this?
Choose three that apply.
A.Install the debugger on the client.
B.Allow debugging to be executed on the AOS.
C.Open the debugger from the Tools menu before the code is executed.
D.Set a breakpoint in the code.
Answer: abd
Microsoft자격증 MB6-821 dumps MB6-821 pdf
NO.11 Isaac, the Systems Developer, needs to write X++ code to iterate through the elements in a Map
object. What class(es) can he use to do this?
Choose two that apply.
A.MapEnumerator
B.MapIterator
C.Map
D.ListIterator
Answer: ab
Microsoft최신덤프 MB6-821 MB6-821 MB6-821덤프
NO.12 What is the advantage of using placeholders when retrieving data from the database?
A.It reduces the time a record is locked and improve scalability.
B.It makes the optimal access plan for each query as all information is available for the database, when
the access plan is decided.
C.It reduces the CPU usage on the database server as the access plan can be reused.
D.It ensures that all the necessary data are retrieved when specifying a field list.
Answer: c
Microsoft자격증 MB6-821기출문제 MB6-821시험문제 MB6-821 dumps
NO.13 Parm tables use a ParmId value to uniquely identify each update. How is the ParmId value created?
A.It is a sequential number taken from the Parm ID number sequence set up on the Administration
parameters.
B.It is a sequential number taken from the System ID number sequence set up on the Company Info
table.
C.It is a GUID created using the newguid() function.
D.It is a GUID created using the WinAPI::createGUID() function.
Answer: b
Microsoft덤프 MB6-821 MB6-821
NO.14 Which runtime class instances exist for a running report with a data source?
Choose two that apply.
A.ReportDesignSpecs
B.QuerySelect
C.QueryRun
D.ReportRun
Answer: cd
Microsoft MB6-821 MB6-821 dumps MB6-821 MB6-821
NO.15 Suppose you have a handle to a temporary table. How do you make this visible in a form with the
temporary table as data source?
A.Loop through the data in the temporary table and copy each record to the data source using .insert().
B.The data will be visible without any manipulation as the handle and data source share the same table
definition.
C.Call the method .loadTmpData() on the data source and specify the handle to the temporary data.
D.Redirect the data source to use the same file as the handle by calling the method .setTmpData().
Answer: d
Microsoft MB6-821 pdf MB6-821자격증 MB6-821 dumps
NO.16 Where is the entire table cache located?
A.It will be present on the client to reduce response time when browsing the data in a grid.
B.It will be present on the server to make the cached data available for all clients connected.
C.It will be present on a dedicated cache server to support clustering of multiple AOS servers.
D.It will be present on the database server as this will reduce the internal disk I/O and improve scalability.
Answer: b
Microsoft MB6-821 MB6-821 MB6-821
NO.17 How would you cache display methods on forms?
A.Modify the DisplayCache form method, adding the element.cache() before super()
B.Set the method modifier to Cache Display.
C.Add a call to the method cacheAddMethod after super() in the Init method of the form.
D.Set the Cacheable property on the display method to Yes.
Answer: c
Microsoft MB6-821 dump MB6-821 MB6-821 dump MB6-821
NO.18 On which tier is the physical file holding a temporary table placed?
A.It is placed on the tier where the first record in inserted.
B.It is always placed on the AOS, as this will reduce the traffic between AOS server and the database.
C.It is placed on the tier, where the handle is defined.
D.It is always placed on the client to secure the Trustworthy Computing principles.
Answer: a
Microsoft MB6-821 MB6-821덤프 MB6-821
NO.19 Isaac, the Systems Developer has moved the axCUS.aod and axCONen-us.ald files from the
development application directory to the test application directory. What must he also do to ensure the
labels are updated correctly?
A.Recompile the application.
B.Synchronize the database.
C.Delete the axCONen-us.ali file.
D.Synchronize the labels.
Answer: c
Microsoft MB6-821 MB6-821자격증 MB6-821 pdf
NO.20 What are the main journals in Microsoft Dynamics AX?
Choose three that apply.
A.Ledger
B.Inventory
C.Project
D.Trade
Answer: abc
Microsoft최신덤프 MB6-821자격증 MB6-821 MB6-821자료 MB6-821덤프
NO.21 Which of the following is a difference between the two classes: RecordSortedList and
RecordInsertList?
A.RecordInsertList lacks the sort order features that are available in RecordSortedList.
B.RecordSortedList lacks the sort order features that are available in RecordInsertList.
C.RecordInsertList cannot insert multiple records into the database in one trip.
D.RecordSortedList cannot insert multiple records into the database in one trip.
Answer: a
Microsoft dumps MB6-821 MB6-821자료
NO.22 How can the best-practice error in a display method be turned off, after it has been investigated
whether record-level security is required?
A.Add the comment://Record-security documented
B.Add the keyword Secure to the method definition.
C.Add the comment://BP deviation documented
D.Add the keyword Ignore to the method definition.
Answer: c
Microsoft자격증 MB6-821자료 MB6-821 MB6-821
NO.23 Which select statement is identical to the Query object produced by the following block of code?
Query q;
QueryBuildDataSource qbDS;
QueryBuildRange qbR;
;
q = new Query();
qbDS = q.addDataSource(tableNum(InventTrans));
qbDS.addSelectionField(fieldNum(InventTrans,Qty),SelectionField::Sum);
qbDS.orderMode(OrderMode::GroupBy);
qbR = qbDS.addRange(fieldNum(InventTrans, ItemId)).value(SysQuery::value(""OL-2500""));
qbDS = qbDS.addDataSource(tableNum(InventDim));
qbDS.orderMode(OrderMode::GroupBy);
qbDS.addSortField(fieldNum(InventDim, InventBatchId));
qbDS.relations(true);
A.while select sum(qty) from inventTranswhere inventTrans.ItemId ==OL-2500join inventDimgroup by
inventBatchIdwhere inventDim.InventDimId == inventTrans.InventDimId
B.while select inventTranswhere inventTrans.ItemId ==OL-2500join inventDimgroup by
inventBatchIdwhere inventDim.InventDimId == inventTrans.InventDimId
C.select sum(qty) from inventDimgroup by inventBatchIdjoin inventTranswhere inventTrans.InventDimId
== inventDim.InventDimId&& inventTrans.ItemId ==OL-2500
D.while select sum(qty) from inventDimgroup by inventBatchIdjoin inventTranswhere
inventTrans.InventDimId == inventDim.InventDimId&& inventTrans.ItemId ==OL-2500
Answer: a
Microsoft MB6-821 MB6-821 MB6-821자격증 MB6-821자격증
NO.24 What is the Args-class used for?
A.It verifies arguments sent to the Called application object.
B.It passes information between running application objects.
C.It handles end-user input.
D.It handles external access to classes in the AOT.
Answer: b
Microsoft MB6-821 MB6-821기출문제
NO.25 To obtain an overview of the data types inherited from AmountMST, which of the following would you
use?:
A.The Reverse Engineering tool.
B.The "Used by" node in the AOT.
C.The "References" node in the AOT.
D.The Application Hierarchy Tree.
Answer: d
Microsoft기출문제 MB6-821덤프 MB6-821자료 MB6-821기출문제
NO.26 To optimize a While Select statement what should you consider using?
Choose two that apply.
A.Fieldlist
B.Order by
C.Join
D.Quick select
Answer: ac
Microsoft기출문제 MB6-821 MB6-821 MB6-821덤프 MB6-821 dumps
NO.27 When will the default behavior of a select statement be to use literals?
A.When the number of records exceeds the threshold specified in the Server Configuration Utility.
B.When the select joins more than two tables from the table groups: Miscellaneous, Main, Transaction,
Worksheet Header & Worksheet Line.
C.When no locking (forupdate) is specified on the select statement.
D.When an update is performed using an array operation like update_recordset or delete_from.
Answer: b
Microsoft MB6-821최신덤프 MB6-821 dump MB6-821덤프
NO.28 Where are the online help files stored?
A.In the AOT.
B.In .chm files on the client machine.
C.In .hlp files on the AOS.
D.In .ahp files in the application files directory.
Answer: b
Microsoft MB6-821 MB6-821 MB6-821 MB6-821 MB6-821
NO.29 Which method on RunBase class does the following statement describe?
"This method receives a container as a parameter and restores the type specific variables of the class"
A.initValue
B.main
C.unpack
D.getFromDialog
Answer: c
Microsoft MB6-821 MB6-821최신덤프 MB6-821 MB6-821자격증
NO.30 What is the purpose of the RunBase framework?
A.It defines a common structure for all reports in Microsoft Dynamics AX.
B.It defines a common structure for all access rights in Microsoft Dynamics AX.
C.It defines a common structure for all data manipulations in Microsoft Dynamics AX.
D.It defines a common structure for all forms in Microsoft Dynamics AX.
Answer: c
Microsoft자격증 MB6-821 MB6-821자격증 MB6-821 MB6-821
ITexamdump의 E20-553덤프의 VCE테스트프로그램과 EX0-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-654시험에 대비한 고품질 덤프와 EN0-001시험 최신버전덤프를 제공해드립니다. 최고품질 74-338시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기