ITExamDump를 선택함으로 여러분은 CompTIA 인증PD0-001시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 CompTIA 인증PD0-001시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는CompTIA 인증PD0-001덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며CompTIA 인증PD0-001시험을 한번에 패스하도록 도와드립니다.
ITExamDump에서는 가장 최신이자 최고인CompTIA인증 PD0-001시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. CompTIA인증 PD0-001덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. CompTIA인증 PD0-001시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.
ITExamDump 의 CompTIA인증 PD0-001덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.
시험 번호/코드: PD0-001
시험 이름: CompTIA (CompTIA PDI+ Beta Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 861 문항
업데이트: 2014-04-09
ITExamDump의CompTIA인증 PD0-001덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다. 여러분이 신뢰가 생길수 있도록ITExamDump에서는CompTIA인증 PD0-001덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다. CompTIA인증 PD0-001덤프로CompTIA인증 PD0-001시험을 준비하여 한방에 시험패하세요.
PD0-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/PD0-001.html
NO.1 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA PD0-001 PD0-001기출문제 PD0-001
NO.2 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA덤프 PD0-001 PD0-001덤프 PD0-001
NO.3 How should a service representative provide closure at the end of a call for a client?
A.Explain the issues of the call, the steps taken to resolve them and query the client if they have any
additional needs.
B.Explain the solution to the issue and then provide the client with the technicians contact information in
case they have any questions.
C.Give the client a technical explanation on the issue and how it was fixed; throw any faulty equipment in
the clients garbage.
D.Proceed to the next service call, check back with the client in a week to see if they have any additional
needs.
Answer: A
CompTIA덤프 PD0-001 PD0-001최신덤프
NO.4 When arriving at the customers location, two different users describe the problem, and from their
description it seems to be two separate problems. Which of the following is an appropriate step to take?
A.Ignore both of them and decide what the real problem is.
B.Set up a separate call for each problem.
C.Have them duplicate the problem at the device.
D.Ask a third person and see if the problem is the same thing.
Answer: C
CompTIA자격증 PD0-001인증 PD0-001 PD0-001 PD0-001덤프
NO.5 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD0-001인증 PD0-001 PD0-001자격증
NO.6 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD0-001 PD0-001 dump PD0-001 PD0-001 pdf
NO.7 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD0-001 PD0-001자료 PD0-001 PD0-001 dump PD0-001
NO.8 Which of the following items can be used as a discharge lamp?
A.Halogen lamp
B.Light Emitting Diodes (LED)
C.Fuser lamp
D.Cleaning roller
Answer: B
CompTIA자격증 PD0-001자료 PD0-001 PD0-001 PD0-001덤프
NO.9 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA pdf PD0-001 PD0-001 PD0-001자격증
NO.10 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA dump PD0-001 PD0-001최신덤프 PD0-001인증
NO.11 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA dumps PD0-001 PD0-001 PD0-001최신덤프
NO.12 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA자료 PD0-001 PD0-001 PD0-001
NO.13 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA PD0-001 PD0-001자료 PD0-001 PD0-001 dumps
NO.14 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA최신덤프 PD0-001인증 PD0-001 dumps
NO.15 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA PD0-001 PD0-001 PD0-001
NO.16 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA PD0-001 PD0-001 dump PD0-001인증
NO.17 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA dump PD0-001덤프 PD0-001최신덤프 PD0-001 dumps PD0-001
NO.18 Scheduled preventative maintenance visits should be carried out:
A.after two unplanned service calls.
B.according to manufacturers specifications.
C.when the device is becoming unreliable.
D.every sixty days.
Answer: B
CompTIA PD0-001 PD0-001 dumps PD0-001 PD0-001시험문제
NO.19 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD0-001시험문제 PD0-001 pdf PD0-001 PD0-001 PD0-001인증
NO.20 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA pdf PD0-001인증 PD0-001 dumps
NO.21 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA기출문제 PD0-001 PD0-001 PD0-001 dumps
NO.22 Which of the following failed components would be responsible for the fuser unit not heating properly?
A.Halogen lamps
B.Ball bearing
C.Hot roller
D.Pressure roller
Answer: A
CompTIA dumps PD0-001최신덤프 PD0-001 pdf PD0-001 PD0-001자료
NO.23 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA dumps PD0-001덤프 PD0-001자격증 PD0-001 dump
NO.24 Which of the following types of media would MOST likely cause above normal amounts of machine
jamming?
A.Envelopes
B.Colored media
C.Letterhead
D.Pre punched
Answer: A
CompTIA PD0-001 pdf PD0-001 PD0-001 PD0-001자격증
NO.25 Which of the following type of lamp is used for heating a fuser?
A.Xenon
B.Halogen
C.Incandescent
D.Light Emitting Diode
Answer: B
CompTIA인증 PD0-001 PD0-001
NO.26 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA PD0-001 PD0-001인증
NO.27 When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should
the technician handle this?
A.Answer the call and talk to your friend at the customer site.
B.Answer the call and tell the friend you will call them later.
C.Let it go to voicemail, call them back between service calls.
D.Let it ring and call the friend back when the customer leaves.
Answer: C
CompTIA자료 PD0-001인증 PD0-001 PD0-001 dump PD0-001 dump
NO.28 Which of the following is the FIRST step a technician should take when troubleshooting a device
issue?
A.Gather information from the customer.
B.Isolate the problem on the device.
C.Read the service documentation for possible causes.
D.Check the parts life counters.
Answer: A
CompTIA PD0-001 PD0-001자료 PD0-001
NO.29 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA시험문제 PD0-001 PD0-001 PD0-001 pdf
NO.30 Which of the following devices can route electrical signals only when activated by an external control
signal?
A.Solenoid
B.Relay
C.Clutch
D.Capacitor
Answer: B
CompTIA자료 PD0-001 dump PD0-001최신덤프
ITexamdump의 JN0-692덤프의 VCE테스트프로그램과 00M-617덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C2040-441시험에 대비한 고품질 덤프와 C_A1FIN_10시험 최신버전덤프를 제공해드립니다. 최고품질 JK0-U21시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기