Juniper JN0-314 덤프자료

ITExamDump에서는Juniper 인증JN0-314시험대비덤프를 발췌하여 제공해드립니다. Juniper 인증JN0-314시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인Juniper 인증JN0-314시험대비덤프로Juniper 인증JN0-314시험준비공부를 해보세요. 통과율이 100%입니다.

ITExamDump의 Juniper 인증 JN0-314시험덤프공부자료 출시 당시 저희는 이런 크나큰 인지도를 갖출수 있을지 생각도 못했었습니다. 저희를 믿어주시고 구매해주신 분께 너무나도 감사한 마음에 더욱 열심히 해나가자는 결심을 하였습니다. Juniper 인증 JN0-314덤프자료는ITExamDump의 전문가들이 최선을 다하여 갈고닦은 예술품과도 같습니다.100% 시험에서 패스하도록 저희는 항상 힘쓰고 있습니다.

일반적으로Juniper인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니. 마침 우리ITExamDump 의 문제와 답들은 모두 이러한 과정을 걸쳐서 만들어진 아주 완벽한 시험대비문제집들입니다. 우리의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%보장 도를 자랑하며 만약 우리ITExamDump의 제품을 구매하였다면Juniper관련 시험패스와 자격증취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.

목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? Juniper인증 JN0-314시험을 패스하는 길에는ITExamDump의Juniper인증 JN0-314덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의Juniper인증 JN0-314덤프는 시험문제에 초점을 두어 제작된 공부자료이기에Juniper인증 JN0-314패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.

시험 번호/코드: JN0-314

시험 이름: Juniper (Junos Pulse Access Control, Specialist (JNCIS-AC))

JN0-314 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-314.html

NO.1 Which three settings are accessible from the serial console menu on a MAG Series device? (Choose
three.)
A. The ping command
B. Factory default reset
C. Personality image
D. License imports
E. Admin login credentials
Answer: A,B,E

Juniper   JN0-314   JN0-314   JN0-314   JN0-314덤프

NO.2 A customer wants to create a custom Junos Pulse configuration. Which two are required? (Choose two)
A. Connection set
B. Configuration set
C. Custom installer
D. Component set
Answer: A,D

Juniper   JN0-314기출문제   JN0-314   JN0-314   JN0-314   JN0-314 dump

NO.3 You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty
connecting to a protected resource.
Which two elements must exist so the user can access the resource? (Choose two.)
A. Resource access policy on the MAG Series device
B. IPsec routing policy on the MAG Series device
C. General traffic policy blocking access through the firewall enforcer
D. Auth table entry on the firewall enforcer
Answer: A,D

Juniper   JN0-314자격증   JN0-314   JN0-314   JN0-314

NO.4 You want to ensure that users who access the company's protected resources present a client
certificate before they are allowed to sign in.
What should you configure?
A. A certificate authentication policy that allows all users and remembers certificate information while the
user is signed in.
B. A certificate authentication policy that only allows users with a client-side certificate signed by a trusted
client CA to sign in.
C. A certificate role restriction that allows all users and remembers certificate information while the user is
signed in.
D. A certificate role restriction that only allows users with a client-side certificate signed by a trusted client
CA to sign in.
Answer: B

Juniper dump   JN0-314   JN0-314 dump   JN0-314덤프

NO.5 A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access
Control Service. When configuring the switch on the Junos Pulse Access Control Service, the customer
does not find a make/model entry for it.
Which two actions should the customer take to make the switch work with the Junos Pulse Access Control
Service? (Choose two.)
A. Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
B. Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
C. Add the switch as a firewall enforcer.
D. Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the
make/model.
Answer: A,D

Juniper   JN0-314시험문제   JN0-314인증

NO.6 What is the function of Host Checker?
A. To allow clientless access to the network
B. To restrict access to protected resources on the network
C. To scan an endpointfor compliance with security policies
D. To push a firewall policy to the endpoint's local firewall application
Answer: B

Juniper기출문제   JN0-314   JN0-314최신덤프

NO.7 A user's Junos Pulse client uses 802.1X to access a wired network and is failing to authenticate. You
run a packet capture from the user's PC and notice that immediately after the client machine sends an
EAPoL-start packet, an EAP-failure packet is returned. You review the RADIUS troubleshooting logs on
the MAG Series device and do not see any authentication attempts from the user. Other users on the
same Ethernet switch are successfully authenticating.
Which device is sending the EAP-failure packet to the workstation?
A. The RADIUS server
B. The EAPoL server
C. The workstation's network adapter
D. The Ethernet switch
Answer: D

Juniper pdf   JN0-314   JN0-314   JN0-314   JN0-314   JN0-314

NO.8 You navigate to "UAC" > "Infranet Enforcer" > "Auth Table Mapping" in the admin GUI. You see one
policy, which is the unmodified, original default policy.
Which statement is true?
A. Dynamic auth table mapping is not enabled.
B. A successful authentication attempt will result in a new authentication table entry, which will be
delivered only to the Junos enforcer protecting the network from which the user has authenticated.
C. To create a static auth table mapping, you must delete the default policy.
D. The default policy applies only to the factory-default role User.
Answer: A

Juniper   JN0-314인증   JN0-314   JN0-314자격증

NO.9 You have a Junos Pulse Secure Access Service acting as an IF-MAP client, configured to federate all
user roles to a Junos Pulse Access Control Service acting as an IF-MAP Federation server. A remote user
using Junos Pulse logs in to the Junos Pulse Secure Access Service; the Junos Pulse Secure Access
Service provisions a remote access session for that user.
What happens next?
A. The Junos Pulse Secure Access Service redirects the user to the Junos Pulse Secure Access Service
for authentication
B. The Junos Pulse Access Control Service provisions enforcement points to enable resource access for
that user.
C. The Junos Pulse Secure Access Service publishes user session and role information to the IFMAP
Federation server,
D. The Junos Pulse Secure Access Service provisions enforcement points to enable resource access for
that user.
Answer: C

Juniper   JN0-314 pdf   JN0-314   JN0-314   JN0-314시험문제

NO.10 You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG
Series device. Which statement is true?
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device
defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series
devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device
defined in each configuration.
D. A single Infranet Enforcer instance is created with the VIP of the clustered SRX Series device defined
in the configuration.
Answer: B

Juniper   JN0-314자료   JN0-314덤프   JN0-314   JN0-314   JN0-314

NO.11 What are two ways to access the Junos Pulse Access Control Service? (Choose two.)
A. admin GUI
B. Telnet
C. SSH
D. console
Answer: B,C

Juniper자료   JN0-314최신덤프   JN0-314   JN0-314   JN0-314

NO.12 What is a type of firewall enforcer supported by the Junos Pulse Access Control Service.?
A. Checkpoint firewall
B. SRX Series device
C. DP sensor
D. MX Series device
Answer: A

Juniper   JN0-314   JN0-314자료

NO.13 Click the Exhibit button.
What is the cause of the error shown in the exhibit?
A. A RADIUS request is being received from a device that is not configured on the RADIUS Client page.
B. A user entered an incorrect password during RADIUS authentication.
C. A RADIUS proxy attempt failed to reach the configured proxy server.
D. The RADIUS shared secret is incorrect.
Answer: A

Juniper dumps   JN0-314기출문제   JN0-314   JN0-314

NO.14 A customer is trying to decide which 802.1X inner protocol to use on their network. The customer
requires that no passwords be sent across the network in plain text, that the protocol be supported by the
Windows native supplicant, and that the protocol supports password changes at Layer 2.
Which protocol would meet the customer's needs?
A. EAP-TLS
B. EAP-MD5
C. PAP
D. EAP-MSCHAPv2
Answer: D

Juniper인증   JN0-314최신덤프   JN0-314

NO.15 You are configuring an IPsec routing policy that will be used with a ScreenOS firewall enforcer. What
must you also configure?
A. Source IP policies on the ScreenOS device
B. ScreenOS IPsec policies on the Junos Pulse Access Control Service
C. VPN NAT traversal on the ScreenOS device
D. Source interface policies on the Junos Pulse Access Control Service
Answer: B

Juniper   JN0-314인증   JN0-314   JN0-314자료

IT업계에 종사하고 계시나요? 최근 유행하는Juniper인증 JN0-314 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Juniper인증 JN0-314덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Juniper인증 JN0-314덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?